DTAForum.com - a forum for the DTA ECU

Alex... any thoughts about these fetures?

Yes I know you just need the recomended sensor.. But in my case I want a kit to have a e85 gauge. And to connect a e85 gauge to the ecu I need it to accept 0-5v.. Otherwise I need 2 sensors and it gets both complicated and expensive with high flow fuel systems with PTFE hoses, hose ends, low flow se...

Allright thank you

As I get it you can only apply the dead times for the primery injectors so it is best to have the same injectors as primery and secondary.. their caracteristics should be as close as possible.. Injector dead times is the time it takes for the injectors to open (maybe close also. don´t remember). Tha...

Thanks for quick replyes.. Don´t almost all e85 gauge kits output linear 0-5v to ethanol content ?.. This is the one I have: http://www.zeitronix.com/Products/ECA/ECA.shtml As mensioned I think it can only output a linear 0-5v ethanol content signal.. It can SHOW temps with a flick of a switch thoug...

If I get a deal on a used s100 ecu.. Is there any disadvatages compared to new ones?

Other that I might need to update the firmware and get a cable for it..

A way to map or shape the interpolation curve between two main ignition, and fuel maps based on ethanol content.. Also shape the interpolation curve between 2 boost target/boost PWM maps for petrol and e85. That way one can tailor the main maps between e85 and petrol almost perfectly.. I don´t like ...

The search function is not working very well.. Not for me anyway.. To me it is very helpful to search topic titles for example.. I serched "lambda settings" today and I cant get the search function to work despite what I write or search for. I only get the message that it is a too common o...

Thanks for the replys.. I now know that I can use the k series coils with ease on my b series setup.

Easy as that was what I hoped for.. Many thanks.. Doesn´t you use a resistor to pull up or down so the output doesn´t float?? So the coil gets a consistent signal? A pull up resistor wouldn´t it keep the signal to about 12v all the time and since the 12v signal output from the ecu trigger the coil t...