DTAForum.com - a forum for the DTA ECU

Good morning, update the firmware to the latest one and it should work.

Good afternoon, that is correct, the new T series units will be lighter and more airtight with plastic coating. This was communicated to us a few weeks ago. The new moulded plastic cases for the bigger ECUs have been well received, especially the weight saving and built in mounting points. We will h...

Well, that has no solution, the problem is due to the use of a USB-RS232 adapter. I use a PC with direct RS232 and it simply takes about 6 minutes to download 1 hour of information. I think that with the CAN to USB adapter that DTA had it was about 1 min for an hour of data. If I remember correctly,...

Hi, it is one thing for the ECU to emit a signal via CAN and quite another for the steering to recognize what the CAN emits.

there are external modules to make it work. even for some toyota model.

https://www.ebay.es/itm/252474090150?ha ... SwAa1Zda1e

Crank sensor connections Use twisted pair wire with overall screen for crank sensor VR sensor pin outs (magnetic) Pin 1 to pin 18 Pin 2 to pin 20 Shield to pin 20 at ECU Vauxhall/Opel/BMW/Volvo/Saab/e tc. (Bosch & Siemens) Pin 1 to pin 18 Pin 2 to pin 20 Pin 3 to shield to pin 20 at ECU Marelli ...

dta e48, only accepts 2 or 3 wire VR sensors, nothing hall or optical.

You have to change the sensor.

If it is powered, it should not work for this old ecu

the brand and model I think I understand what you are asking.
champion qc59c intermittent failure.
new denso ik22.
spark plug wires with resistor I don't remember if 1k or 5k (type golf 2)

It was just noise at that time

good morning. Some time ago I experienced a very similar fault, it only occurred at low revolutions and in an unpredictable way, on occasion sporadic, on another very often, the engine never stopped but it was not comfortable, it was a rapid engine failure accompanied by an incident in the crankshaf...

good morning, my experience with this type of error, is to bring the sensor closer to the pulley, in that bmw 20 model it is fixed and the adjustment is not possible, check if the pulley is centered since it is mounted on rubber and it is common for it to faded with years of use. the configuration t...

Good morning, connect your pc to dta, so you say there may be a temporary short circuit when you press the button, and the ecu warns by making the fan work, a large red screen appears on the pc screen indicating that there is a short- circuit. to the connector -B- pin 4 there will be a button normal...