Sorry, buy just to be sure again about cam sensor compatibility, any of them will works with the dta ?
I've got a BOSCH - 0 232 103 003 there's no probs with that ?
Cheers
Search found 6 matches
- Sat Aug 25, 2018 4:19 am
- Forum: Sensors, Inputs, and Outputs
- Topic: Cam and cranck sensor????
- Replies: 12
- Views: 16887
- Mon Aug 20, 2018 5:54 pm
- Forum: Sensors, Inputs, and Outputs
- Topic: Cam and cranck sensor????
- Replies: 12
- Views: 16887
Re: Cam and cranck sensor????
That's clear !
Thanks Alex
One last thing, any differences for ground between pin 21 & 33 ?
Thanks Alex
One last thing, any differences for ground between pin 21 & 33 ?
- Mon Aug 20, 2018 8:44 am
- Forum: Sensors, Inputs, and Outputs
- Topic: Cam and cranck sensor????
- Replies: 12
- Views: 16887
Re: Cam and cranck sensor????
Ok
So 1 signal crank or cam to ecu and both ground, sensor and shield to pin 33 or 21 right ?
Thx
So 1 signal crank or cam to ecu and both ground, sensor and shield to pin 33 or 21 right ?
Thx
- Mon Aug 20, 2018 2:48 am
- Forum: Sensors, Inputs, and Outputs
- Topic: Cam and cranck sensor????
- Replies: 12
- Views: 16887
Re: Cam and cranck sensor????
Hi,
Just to be sure too, when i read the crank sensor connections on diagrams pages, it talking about Sensor ground and Sensor ground at ECU.
So Sensor Ground is on pin 33 and sensor ground at ECU is the wiring shield on the ECU casing ?
Cheers
Just to be sure too, when i read the crank sensor connections on diagrams pages, it talking about Sensor ground and Sensor ground at ECU.
So Sensor Ground is on pin 33 and sensor ground at ECU is the wiring shield on the ECU casing ?
Cheers
- Fri Apr 27, 2018 2:21 am
- Forum: Wiring and Loom Building
- Topic: S60 loom on my E30 325i
- Replies: 4
- Views: 7420
Re: S60 loom on my E30 325i
I finally start the loom ! I'm happy with that, it's was so difficult to begin I do it with the basic loom sold by DTA and some more pins for the connectors. I use BMW plugs at eachs ends of loom, classic sheath and heat-shrinkable sheath to have a nice and sexy finished loom. I've segregated a part...
- Thu Apr 19, 2018 7:53 am
- Forum: Wiring and Loom Building
- Topic: S60 loom on my E30 325i
- Replies: 4
- Views: 7420
S60 loom on my E30 325i
Hi Guys, I'm starting to install my s60 on my e30 and I just want to be sure about the good way to do it. I'm a mechanic and it's really not in my skills to do a loom, each time I want to start i spend a lot to think, see wirings but for now i can't do it. I've seen some installation with a modified...