DTAForum.com - a forum for the DTA ECU

No errors came up on the diagnostics page and all sensors looked normal.

Turned the flat shift off and the miss fire has disappeared!
Waiting on a new gearbox potentiometer to arrive to try that.

After the build the car was mapped by a professional. Car has competed in 9 or 10 events with no issues and then this miss fire appeared on the last event. All the mixtures are correct and timing is correct. Nothing changed before this event. Only thing different is, this was the wettest event the c...

Sorry, yes it done about 9 or 10 rallys perfect.

Hi All, I'm a bit of a novice when it comes to ECU's. I'm running a pinto engine with Jenvey throttle bodies and a dta S40. At low rev's (1500 to 2500 rpm) when I apply load to it, a slight miss fire comes into it. If I go up another gear it will clear. If I try and take off going up a hill in 1st g...

Hi All, I'm having difficulty getting the alert strip working on my dash. I lowered the maximum water temperature and let the car tick over till it was over the maximum set temperature. The figures in the dash went red but the strip never appeared. Alert val. = RPM Value S. = 2000.00 Delay (ms) = 50...

Hi All,

I have noticed there is a new version of the X dash available recently.

The wiring looms are different. Is the software also different

Thanks in advance.

Hi All, A small bit off topic but someone might know. I'm building a rally car and hoping to have a few switches on the steering wheel. Can someone advise me where I'd be able to buy fancy buttons? I'm thinking of having 5 buttons on the steering wheel. 1) Start button 2) Heated screen L 3) Heated s...

some amount of work gone into this car. what kind of brake fluid you using? is that the corsa power steering your using on it too?

here's a link of my car after fitting the flat shift

Hi All, I'm new to this forum. I have a S40 ecu in a mk2 escort running 300bhp and a quaife 60g gearbox. I put the flat shift working in this after a lot of trouble with changing the gear potentiometer and the displace and also running into problems with the engine stalling while I was going down th...