DTAForum.com - a forum for the DTA ECU

On launch control setting what actual does the target slip % do?

Ok thanks guys

What does the "control loop frequency 1-50 hertz control with the 2 step. Does that control how fast the 2 step goes?

Hey i have a s60 pro on my gsxr1000 and for some reason i keep getting crank errors which causeing the bike to not wanna run at all at times, has sheilded wire and wired correctly any suggestions, has red spikes in oscilloscope test.

I got the spec sheet and I've got everything scaled correctly in the ecu but soon as I turn the ecu switch in the on position its telling me I have 27psi of oil pressure and the bikes not even running that cant be correct, and look at the oil psi when the bike is running shouldnt be that way I think...

Ok just read it, but in order to scale it correctly dont I need to put an oil pressure gauge on it to see where the oil pressure is at that given voltage for the oil pressure sensor?

Cut the switch on I mean sorry, and its wired correctly, I believe my sensor is going bad it's a cheap one anyway

I went into the ecu and just cut the switch in when the bike was off and it read 1235v and 27psi of oil pressure I know that couldn't be right.then when I started it the oil pressure drops

It's a pressure transducer sensor.

I have a 150psi oil pressure sensor and when the bike is running at idle itll read fine and when I rev it up itll drop oil pressure at least that's what the sensor is telling the ecu, it was at 76psi at idle almost and then around 9 psi at 8k rpm so I'm thinking the sensor is faulty. Anyone ever had...