It is currently Tue Aug 14, 2018 4:18 am



Post new topic Reply to topic  [ 10 posts ] 
Author Message
 Post subject: Fiat uno turbo 16v
PostPosted: Mon Dec 12, 2016 5:26 pm 
Offline

Joined: Wed Apr 15, 2015 11:22 am
Posts: 7
ECU Model: S60 Pro
Distributor: used
Firmware Version: 43
Hello from Greece
This is my daily driven Fiat uno turbo
The engine is from fiat bravo 1600 16v converted to turbo running an S60 pro ecu
Lately dyno results 490hp@1,6bar on pump gas

[facebookvideo]https://www.facebook.com/constantine.liakos/videos/vb.672625953/10154112496920954/?type=3&theater[/facebookvideo]


Attachments:
20150604_101652.jpg
20150604_101652.jpg [ 1.82 MiB | Viewed 8034 times ]
20161116_232014.jpg
20161116_232014.jpg [ 1.49 MiB | Viewed 8034 times ]
20161007_153147 (2).jpg
20161007_153147 (2).jpg [ 439.85 KiB | Viewed 8034 times ]
Top
 Profile  
 
 Post subject: Re: Fiat uno turbo 16v
PostPosted: Mon Dec 12, 2016 6:25 pm 
Offline

Joined: Tue Aug 02, 2011 12:08 pm
Posts: 2882
Location: Norn Iron
ECU Model: No ECU
Thats some very impressive numbers for very modest boost !! and even better for a small engine


Top
 Profile  
 
 Post subject: Re: Fiat uno turbo 16v
PostPosted: Tue Dec 13, 2016 3:09 am 
Offline

Joined: Tue Jul 26, 2011 10:15 am
Posts: 126
ECU Model: S60 Pro
Firmware Version: 71
Nice! And power to 9000rpm too!

It's like the smaller version of the turbo tipo I had :)


Top
 Profile  
 
 Post subject: Re: Fiat uno turbo 16v
PostPosted: Tue Dec 13, 2016 5:38 am 
Offline

Joined: Mon Jan 16, 2012 1:39 pm
Posts: 79
ECU Model: S40 Pro
Firmware Version: 58
very nice project...but totally wrong turbocharger selection at my opinion...


Top
 Profile  
 
 Post subject: Re: Fiat uno turbo 16v
PostPosted: Tue Dec 13, 2016 6:01 am 
Offline

Joined: Tue Aug 02, 2011 12:08 pm
Posts: 2882
Location: Norn Iron
ECU Model: No ECU
iceman_n wrote:
very nice project...but totally wrong turbocharger selection at my opinion...


wrong for what though ?

If it's power you're after, baby turbos just wont cut it.


Top
 Profile  
 
 Post subject: Re: Fiat uno turbo 16v
PostPosted: Tue Dec 13, 2016 10:33 am 
Offline

Joined: Mon Jan 16, 2012 1:39 pm
Posts: 79
ECU Model: S40 Pro
Firmware Version: 58
it has only 500hp at 9000rpm, his horsepower is based on rpm and not on torque...

with a better turbocharger with better compressor map you can achieve the same hp in much lower rpm cause of much more of torque...



your comment would be true if it has around 800hp then yes it couldnt do something better in mid range rpm but now the 500hp is a feasible goal with another turbocharger with its new technology...


Top
 Profile  
 
 Post subject: Re: Fiat uno turbo 16v
PostPosted: Tue Dec 13, 2016 12:03 pm 
Offline

Joined: Tue Aug 02, 2011 12:08 pm
Posts: 2882
Location: Norn Iron
ECU Model: No ECU
As he's only running a lowly 1.6 bar...I'd guess he is only just getting warmed up ?


Top
 Profile  
 
 Post subject: Re: Fiat uno turbo 16v
PostPosted: Tue Dec 13, 2016 12:58 pm 
Offline

Joined: Wed Apr 15, 2015 11:22 am
Posts: 7
ECU Model: S60 Pro
Distributor: used
Firmware Version: 43
Don't forget that it is a lightweight street car that can't use larger than 205/50/15 tires.
The extra torque only problems could cause.
Thats the reason the boost stopped at 1,6 bar


Top
 Profile  
 
 Post subject: Re: Fiat uno turbo 16v
PostPosted: Tue Dec 13, 2016 5:18 pm 
Offline

Joined: Mon Jan 16, 2012 1:39 pm
Posts: 79
ECU Model: S40 Pro
Firmware Version: 58
the problem it not the torque itself...its the torque on 7000, so much lag

you cant say its street car for street use with so much lag...a street car for everyday use has aroun 40 kg of torgue on a range of 3500-6500rpm with red line on 7500 rpm

it allows you to run the car with one gear up without needing to downshift to by pass a car on highway...

this setup reminds me drag, street racing setup...its totaly pointless for street use...

imagine how much faster would be a lightweight car as you said with 40 kg of torgue on mid range rpm, it will kill your setup on the street in every aspect, yours is just faster on 0-400 drag usage

if you built it for street/drag racing then its fine but dont say its for street/everyday use...


Top
 Profile  
 
 Post subject: Re: Fiat uno turbo 16v
PostPosted: Tue Dec 13, 2016 5:47 pm 
Offline

Joined: Tue Aug 02, 2011 12:08 pm
Posts: 2882
Location: Norn Iron
ECU Model: No ECU
Just because it is daily driven, doesnt mean it cant also be a fast car for drag racing.

There will always be compromises somewhere, but if his priority is going fast at the strip....but cannot afford a dedicated drag car, then have one that covers both drag and road.

Nobody's setup will be perfect for every application.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Theme designed by stylerbb.net © 2008
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
All times are UTC - 5 hours