Arduino CAN Colour Dash Display

Document your project with images, pictures, etc., and share with others.
Tim
Posts: 81
Joined: Tue Sep 13, 2016 9:06 am
ECU Model: S80 Pro

Re: Arduino CAN Colour Dash Display

Post by Tim »

Had a productive weekend working on both dashboard and button panels.

Image

Image

Image

Whilst I was there to have button panels cut, I also asked if it was possible to have a test piece cut for the fascia of my dash. We used a 3mm piece of scrap plastic just to make sure it fit, and after a small amount of tweaking it did so.

Next weekend I hope to have the carbon fibre cut for real. I'm pretty pleased with how it has come out, and for a proof of concept / prototype it'll work just fine in the car.

This evening however I fired up Fusion again to have a play around with the enclosure and fascia coming up with the following:

Image

Image

A very similar shape, slightly larger radiuses at the top, and I've incorporated a small sun-visor too. Not that this is necessary given the screen is very bright, but I think it looks neater.

I threw together some small brackets in fusion as well which will help mount the thing in the car, I'll get those cut this weekend as well.
Tim
Posts: 81
Joined: Tue Sep 13, 2016 9:06 am
ECU Model: S80 Pro

Re: Arduino CAN Colour Dash Display

Post by Tim »

Image
Tim
Posts: 81
Joined: Tue Sep 13, 2016 9:06 am
ECU Model: S80 Pro

Re: Arduino CAN Colour Dash Display

Post by Tim »

I recently bought a couple of new tools for my 'workshop' in the shape of a 3D printer and desktop CNC router. It has taken me a while to get to grips with operating both machines, but I seem to be at a point where I can get repeatable results and am starting to learn the ins and outs of it all.

Image

Some tweaks are needed to make it "perfect" but I'm really happy with how it's looking now and can't wait to get it working in the car. Speaking of which, I've now completed 99% of the chassis wiring harness and am about to move onto the engine side of things. Currently setting money aside to sort out the temperature and pressure sensors I want to run.

As always, really enjoying the process of making.

Another project I've been working on is a button panel for my steering wheel. I finally got it labelled and wired up a couple of weeks ago. The labelling is actually a print onto the face of the carbon fibre (no comments on my label orientation, please, ha!).

The panel is 3mm carbon fibre, and makes use of eight Otto P9 buttons, a couple of toggle switches, along with some Raychem and SOURIAU goodies. I couldn't justify the cost of boots for all the switches so it's not as tidy as I'd like, but it's all secure and working.

I got it wired into the car, and it's great to hear it clicking relays! Hopefully soon the relays will spring things into life.

Image

Image

Image
troy
Posts: 50
Joined: Wed Apr 04, 2012 12:40 am
ECU Model: S80 Pro
Firmware Version: 62

Re: Arduino CAN Colour Dash Display

Post by troy »

Would you mind elaborating on the issues you had with the rev counter and what you did to get around it?

Looking at using one of these displays for a different project and just wondering what issues you encountered.
Tim
Posts: 81
Joined: Tue Sep 13, 2016 9:06 am
ECU Model: S80 Pro

Re: Arduino CAN Colour Dash Display

Post by Tim »

Troy, apologies for not getting back to you.

My car, dashboard, and anything Motorsport related has taken a bit of a back seat this summer, slowly getting back into the swing of things.

I was having problems with latency on the control I used to display RPM, was a bit of a faff but got there in the end. There is a post on the 4D forum with reference to it, in there are code snippets, etc to get it working just like mine.
Post Reply