Page 1 of 9

Hayabusa Turbo Kitcar

Posted: Thu Jul 19, 2012 3:21 pm
by proutyc
Thanks to everyone on here that's helping get mine on the dyno. I thought it was time to put up a couple of pictures of it.

In general

The engine is a 99 hayabusa
Carrillo Rods
MTC 10.5 turbo pistons
Billet clutch
Billet output shaft and undercut trans
Garrett GT3082

Hope to get on dyno soon . We dont have a specialised DTA in Wellington so looking at either trip to New Plymouth (4 hours) or getting local very smart operator to do.

Re: Hayabusa Turbo Kitcar

Posted: Thu Jul 19, 2012 4:14 pm
by stevieturbo
Looks like a pretty specialist vehicle. What sort of weight is it ? Is it for hillclimbs or something ?

Re: Hayabusa Turbo Kitcar

Posted: Thu Jul 19, 2012 4:46 pm
by Rob Stevens
Now that's what I call a venturi!

Re: Hayabusa Turbo Kitcar

Posted: Thu Jul 19, 2012 5:00 pm
by proutyc
Hi.

We race in a class here in New Zealand called Sports cars (http://sportscarracing.co.nz/) races are about 8-12 laps long in the North Island

Car run alot of Indy car inspired suspension bits. Due to the tunnels we run third springs front and rear to maintain good aero platform.

Hope to see the weight just under 600kg and all going well will start car off at 7psi and see how we shake it down.

Yeah the tunnels grow quite large through the rear wheel space as the have to reduce in width by 50%. They join at the same height as the rear body work.

Sister cars run just over 2g cornering force with tunels about 75% of the growth in these.

Re: Hayabusa Turbo Kitcar

Posted: Mon Aug 06, 2012 7:34 pm
by proutyc
Slowly getting a few more bits completed.

Re: Hayabusa Turbo Kitcar

Posted: Mon Aug 06, 2012 7:36 pm
by proutyc
Trying to get the wiring completed. Will run other plug hopefully tonight

Re: Hayabusa Turbo Kitcar

Posted: Thu Aug 23, 2012 5:30 pm
by Frallan
Congratulations!
That is so nice.
It is very much my idea of a future car I would like to have myself.
Thanks a lot for sharing.

Re: Hayabusa Turbo Kitcar

Posted: Thu Aug 23, 2012 5:36 pm
by Frallan
https://www.pegasusautoracing.com/produ ... oduct=4011

Image

Really nice stuff to help you with making good looking looms.
Now maybe a little bit too late but just this style can in some cases be added afterwards.

Re: Hayabusa Turbo Kitcar

Posted: Thu Aug 23, 2012 11:28 pm
by proutyc
Thanks that looks awesome. I'll grab some. I haven't bundled it up yet as sure something will change

Re: Hayabusa Turbo Kitcar

Posted: Thu Aug 23, 2012 11:33 pm
by proutyc
Wiring update.

Am up to here now. Tested dash. has power