12 position switched rotary potentiometer
- mefmotorsport
- Posts: 543
- Joined: Mon Aug 01, 2011 6:45 am
- ECU Model: S100 Pro
- Distributor: Mefmotorsport
- Firmware Version: 79
- Location: Merseyside
- Contact:
12 position switched rotary potentiometer
12 position switched rotary potentiometer suitable for launch control startline revs or traction control agression.
A switched potentiometer is so much better than a variable potentiomer since you get 12 definable and repeatable settings.
This unit is a high quality minature switch has 12 positions giving 12 equal voltage steps between 0 and 5V. 5K ohms total resistance. It comes with a control knob and 1m 3 core wiring cable.
At £49.50 it might seem expensive but its an expensive switch plus time consuming to make, you try making your own, many people cant!
Martin
Mefmotorsport 07837 721986
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: 12 position switched rotary potentiometer
I could make my own...but it's easier to pay someone lol.
And worth looking into rotary numbered dials, makes position ID much easier.
You can get a knob with a clear numbered 1-12 dial and a backing plate to suit.
And worth looking into rotary numbered dials, makes position ID much easier.
You can get a knob with a clear numbered 1-12 dial and a backing plate to suit.
- mefmotorsport
- Posts: 543
- Joined: Mon Aug 01, 2011 6:45 am
- ECU Model: S100 Pro
- Distributor: Mefmotorsport
- Firmware Version: 79
- Location: Merseyside
- Contact:
Re: 12 position switched rotary potentiometer
stevieturbo wrote:I could make my own...but it's easier to pay someone lol.
And worth looking into rotary numbered dials, makes position ID much easier.
You can get a knob with a clear numbered 1-12 dial and a backing plate to suit.
Thanks Stevie, someone has already asked about a numbered backing plate, do you have a link to such an item?
Im using a switch with a 3mm spindle.
Cheers,
Martin
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: 12 position switched rotary potentiometer
Obviosuly you'd need to find the match for your knob....oooh er...
But this kind of thing
http://uk.farnell.com/mentor/331-203/po ... SearchNB_4
http://uk.farnell.com/bulgin/kx0372/dia ... stViewed_1
And this is the stationary backing plate where the white highlights the switch number
http://uk.farnell.com/mentor/332-300/po ... ngleItem_3
But this kind of thing
http://uk.farnell.com/mentor/331-203/po ... SearchNB_4
http://uk.farnell.com/bulgin/kx0372/dia ... stViewed_1
And this is the stationary backing plate where the white highlights the switch number
http://uk.farnell.com/mentor/332-300/po ... ngleItem_3