12 position switched rotary potentiometer

Post here if you want to sell or buy an ECU or related item.
Post Reply
User avatar
mefmotorsport
Posts: 543
Joined: Mon Aug 01, 2011 6:45 am
ECU Model: S100 Pro
Distributor: Mefmotorsport
Firmware Version: 79
Location: Merseyside
Contact:

12 position switched rotary potentiometer

Post by mefmotorsport »

Image

Image

12 position switched rotary potentiometer suitable for launch control startline revs or traction control agression.

A switched potentiometer is so much better than a variable potentiomer since you get 12 definable and repeatable settings.

This unit is a high quality minature switch has 12 positions giving 12 equal voltage steps between 0 and 5V. 5K ohms total resistance. It comes with a control knob and 1m 3 core wiring cable.

At £49.50 it might seem expensive but its an expensive switch plus time consuming to make, you try making your own, many people cant!

Martin
Mefmotorsport 07837 721986
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: 12 position switched rotary potentiometer

Post by stevieturbo »

I could make my own...but it's easier to pay someone lol.

And worth looking into rotary numbered dials, makes position ID much easier.

You can get a knob with a clear numbered 1-12 dial and a backing plate to suit.
User avatar
mefmotorsport
Posts: 543
Joined: Mon Aug 01, 2011 6:45 am
ECU Model: S100 Pro
Distributor: Mefmotorsport
Firmware Version: 79
Location: Merseyside
Contact:

Re: 12 position switched rotary potentiometer

Post by mefmotorsport »

stevieturbo wrote:I could make my own...but it's easier to pay someone lol.

And worth looking into rotary numbered dials, makes position ID much easier.

You can get a knob with a clear numbered 1-12 dial and a backing plate to suit.

Thanks Stevie, someone has already asked about a numbered backing plate, do you have a link to such an item?

Im using a switch with a 3mm spindle.

Cheers,

Martin
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: 12 position switched rotary potentiometer

Post by stevieturbo »

Obviosuly you'd need to find the match for your knob....oooh er...

But this kind of thing

http://uk.farnell.com/mentor/331-203/po ... SearchNB_4

http://uk.farnell.com/bulgin/kx0372/dia ... stViewed_1

And this is the stationary backing plate where the white highlights the switch number

http://uk.farnell.com/mentor/332-300/po ... ngleItem_3
Post Reply