S60/80/100 housing/mounting bracket

Post here if you want to sell or buy an ECU or related item.
User avatar
mefmotorsport
Posts: 543
Joined: Mon Aug 01, 2011 6:45 am
ECU Model: S100 Pro
Distributor: Mefmotorsport
Firmware Version: 79
Location: Merseyside
Contact:

S60/80/100 housing/mounting bracket

Post by mefmotorsport »

Here is my latest offering, I finally got around to designing a mounting bracket/housing that will accommodate the S60 or S80/100 ecus!

Image

Image

The ecu is a nice snug friction fit inside the ABS 3D printed housing and it has 4 x M6 clearance mounting lugs.

Price will be £49.50 plus £3.50 P&P, Payment by Paypal

available direct from mefmotorsport

email mefmotorsport@btinternet.com


07837 721986
User avatar
ignitionautosport
Posts: 577
Joined: Wed Jul 27, 2011 5:30 am
ECU Model: S80 Pro
Location: New Zealand
Contact:

Re: S60/80/100 housing/mounting bracket

Post by ignitionautosport »

Very nice.
| '94 GSR Lancer | '96 Toyota Carib 20V | '83 Toyota Starlet | www.ignitionautosport.co.nz |
gnutz2
Posts: 190
Joined: Tue Jul 03, 2012 2:33 am
ECU Model: S100 Pro

Re: S60/80/100 housing/mounting bracket

Post by gnutz2 »

That's a nice solution.

Is there one to fit the older (long) s100 ecu's?
User avatar
mefmotorsport
Posts: 543
Joined: Mon Aug 01, 2011 6:45 am
ECU Model: S100 Pro
Distributor: Mefmotorsport
Firmware Version: 79
Location: Merseyside
Contact:

Re: S60/80/100 housing/mounting bracket

Post by mefmotorsport »

gnutz2 wrote:That's a nice solution.

Is there one to fit the older (long) s100 ecu's?
You could use the same housing and have the longer early S100 protruding from each end. I cant remember what the length was of the early one but the current S80/S100 protrudes around 6mm from each end of this housing. The S60 is around 10mm shorter than this housing as you can see in the picture.

Its not really worthwhile me making a longer version since there arn't so many early S100's in use.

Martin
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: S60/80/100 housing/mounting bracket

Post by stevieturbo »

Take a grinder to the big casing to make it smaller ? lol
User avatar
mefmotorsport
Posts: 543
Joined: Mon Aug 01, 2011 6:45 am
ECU Model: S100 Pro
Distributor: Mefmotorsport
Firmware Version: 79
Location: Merseyside
Contact:

Re: S60/80/100 housing/mounting bracket

Post by mefmotorsport »

stevieturbo wrote:Take a grinder to the big casing to make it smaller ? lol
I think you might hit problems fitting the pcb then!
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: S60/80/100 housing/mounting bracket

Post by stevieturbo »

I'm sure the grinder would go through that too lol

Might get some queries about why it doesnt work anymore though :D
PhillipM
Posts: 177
Joined: Tue May 13, 2014 5:30 am
ECU Model: S80 Pro
Distributor: DTA UK
Firmware Version: 73

Re: S60/80/100 housing/mounting bracket

Post by PhillipM »

Ah, you just need a jar of lucas magic smoke to blow back down the traces.
e21-mark
Posts: 12
Joined: Sun Jan 20, 2013 10:20 am
ECU Model: No ECU

Re: S60/80/100 housing/mounting bracket

Post by e21-mark »

Is there anything coming for the S40?
User avatar
mefmotorsport
Posts: 543
Joined: Mon Aug 01, 2011 6:45 am
ECU Model: S100 Pro
Distributor: Mefmotorsport
Firmware Version: 79
Location: Merseyside
Contact:

Re: S60/80/100 housing/mounting bracket

Post by mefmotorsport »

e21-mark wrote:Is there anything coming for the S40?
Yes, after popular demand I have designed one for the S40 now, should be available in a week or so, price will be the same though.

martin
Post Reply