It is currently Fri Aug 17, 2018 1:06 am



Post new topic Reply to topic  [ 13 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: S60/80/100 housing/mounting bracket
PostPosted: Thu Feb 23, 2017 10:18 am 
Offline
User avatar

Joined: Mon Aug 01, 2011 6:45 am
Posts: 502
Location: Lancashire
ECU Model: S100 Pro
Distributor: Mefmotorsport
Firmware Version: 79
Here is my latest offering, I finally got around to designing a mounting bracket/housing that will accommodate the S60 or S80/100 ecus!

Image

Image

The ecu is a nice snug friction fit inside the ABS 3D printed housing and it has 4 x M6 clearance mounting lugs.

Price will be £49.50 plus £3.50 P&P, Payment by Paypal

available direct from mefmotorsport

email mefmotorsport@btinternet.com


07837 721986


Top
 Profile  
 
 Post subject: Re: S60/80/100 housing/mounting bracket
PostPosted: Fri Feb 24, 2017 2:26 pm 
Offline
User avatar

Joined: Wed Jul 27, 2011 5:30 am
Posts: 570
Location: New Zealand
ECU Model: S80 Pro
Very nice.

_________________
| '94 GSR Lancer | '96 Toyota Carib 20V | '83 Toyota Starlet | www.ignitionautosport.co.nz and also on Google+ |


Top
 Profile  
 
 Post subject: Re: S60/80/100 housing/mounting bracket
PostPosted: Fri Feb 24, 2017 5:35 pm 
Offline

Joined: Tue Jul 03, 2012 2:33 am
Posts: 190
ECU Model: S100 Pro
That's a nice solution.

Is there one to fit the older (long) s100 ecu's?


Top
 Profile  
 
 Post subject: Re: S60/80/100 housing/mounting bracket
PostPosted: Sat Feb 25, 2017 11:58 am 
Offline
User avatar

Joined: Mon Aug 01, 2011 6:45 am
Posts: 502
Location: Lancashire
ECU Model: S100 Pro
Distributor: Mefmotorsport
Firmware Version: 79
gnutz2 wrote:
That's a nice solution.

Is there one to fit the older (long) s100 ecu's?


You could use the same housing and have the longer early S100 protruding from each end. I cant remember what the length was of the early one but the current S80/S100 protrudes around 6mm from each end of this housing. The S60 is around 10mm shorter than this housing as you can see in the picture.

Its not really worthwhile me making a longer version since there arn't so many early S100's in use.

Martin


Top
 Profile  
 
 Post subject: Re: S60/80/100 housing/mounting bracket
PostPosted: Sat Feb 25, 2017 12:49 pm 
Offline

Joined: Tue Aug 02, 2011 12:08 pm
Posts: 2882
Location: Norn Iron
ECU Model: No ECU
Take a grinder to the big casing to make it smaller ? lol


Top
 Profile  
 
 Post subject: Re: S60/80/100 housing/mounting bracket
PostPosted: Sat Feb 25, 2017 1:34 pm 
Offline
User avatar

Joined: Mon Aug 01, 2011 6:45 am
Posts: 502
Location: Lancashire
ECU Model: S100 Pro
Distributor: Mefmotorsport
Firmware Version: 79
stevieturbo wrote:
Take a grinder to the big casing to make it smaller ? lol


I think you might hit problems fitting the pcb then!


Top
 Profile  
 
 Post subject: Re: S60/80/100 housing/mounting bracket
PostPosted: Sat Feb 25, 2017 4:07 pm 
Offline

Joined: Tue Aug 02, 2011 12:08 pm
Posts: 2882
Location: Norn Iron
ECU Model: No ECU
I'm sure the grinder would go through that too lol

Might get some queries about why it doesnt work anymore though :D


Top
 Profile  
 
 Post subject: Re: S60/80/100 housing/mounting bracket
PostPosted: Sun Feb 26, 2017 4:48 pm 
Offline

Joined: Tue May 13, 2014 5:30 am
Posts: 157
ECU Model: S80 Pro
Distributor: DTA UK
Firmware Version: 73
Ah, you just need a jar of lucas magic smoke to blow back down the traces.


Top
 Profile  
 
 Post subject: Re: S60/80/100 housing/mounting bracket
PostPosted: Sun Mar 05, 2017 10:16 am 
Offline

Joined: Sun Jan 20, 2013 10:20 am
Posts: 9
ECU Model: No ECU
Is there anything coming for the S40?


Top
 Profile  
 
 Post subject: Re: S60/80/100 housing/mounting bracket
PostPosted: Sun Mar 05, 2017 10:53 am 
Offline
User avatar

Joined: Mon Aug 01, 2011 6:45 am
Posts: 502
Location: Lancashire
ECU Model: S100 Pro
Distributor: Mefmotorsport
Firmware Version: 79
e21-mark wrote:
Is there anything coming for the S40?


Yes, after popular demand I have designed one for the S40 now, should be available in a week or so, price will be the same though.

martin


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 13 posts ]  Go to page 1, 2  Next

Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Theme designed by stylerbb.net © 2008
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
All times are UTC - 5 hours