Page 1 of 2

S60/80/100 housing/mounting bracket

Posted: Thu Feb 23, 2017 10:18 am
by mefmotorsport
Here is my latest offering, I finally got around to designing a mounting bracket/housing that will accommodate the S60 or S80/100 ecus!

Image

Image

The ecu is a nice snug friction fit inside the ABS 3D printed housing and it has 4 x M6 clearance mounting lugs.

Price will be £49.50 plus £3.50 P&P, Payment by Paypal

available direct from mefmotorsport

email mefmotorsport@btinternet.com


07837 721986

Re: S60/80/100 housing/mounting bracket

Posted: Fri Feb 24, 2017 2:26 pm
by ignitionautosport
Very nice.

Re: S60/80/100 housing/mounting bracket

Posted: Fri Feb 24, 2017 5:35 pm
by gnutz2
That's a nice solution.

Is there one to fit the older (long) s100 ecu's?

Re: S60/80/100 housing/mounting bracket

Posted: Sat Feb 25, 2017 11:58 am
by mefmotorsport
gnutz2 wrote:That's a nice solution.

Is there one to fit the older (long) s100 ecu's?
You could use the same housing and have the longer early S100 protruding from each end. I cant remember what the length was of the early one but the current S80/S100 protrudes around 6mm from each end of this housing. The S60 is around 10mm shorter than this housing as you can see in the picture.

Its not really worthwhile me making a longer version since there arn't so many early S100's in use.

Martin

Re: S60/80/100 housing/mounting bracket

Posted: Sat Feb 25, 2017 12:49 pm
by stevieturbo
Take a grinder to the big casing to make it smaller ? lol

Re: S60/80/100 housing/mounting bracket

Posted: Sat Feb 25, 2017 1:34 pm
by mefmotorsport
stevieturbo wrote:Take a grinder to the big casing to make it smaller ? lol
I think you might hit problems fitting the pcb then!

Re: S60/80/100 housing/mounting bracket

Posted: Sat Feb 25, 2017 4:07 pm
by stevieturbo
I'm sure the grinder would go through that too lol

Might get some queries about why it doesnt work anymore though :D

Re: S60/80/100 housing/mounting bracket

Posted: Sun Feb 26, 2017 4:48 pm
by PhillipM
Ah, you just need a jar of lucas magic smoke to blow back down the traces.

Re: S60/80/100 housing/mounting bracket

Posted: Sun Mar 05, 2017 10:16 am
by e21-mark
Is there anything coming for the S40?

Re: S60/80/100 housing/mounting bracket

Posted: Sun Mar 05, 2017 10:53 am
by mefmotorsport
e21-mark wrote:Is there anything coming for the S40?
Yes, after popular demand I have designed one for the S40 now, should be available in a week or so, price will be the same though.

martin