Hey guys -
Here I have an MS 3.57 board (its the surface mount unit which means more reliability and less user-error because there is no assembly) with an MS-I CPU or MS-II CPU. I will sell the unit with an MS-I CPU for $275 shipped or MS-II for $350 shipped. This unit sells for $358 and $438 respectively! You will likely want to buy a new case as I only have one end plate for this. I can include the case(s) I have though. You will want a MS3 3.57 case because of the 3.57 having the two connectors on one end. That retails for $32 from DIYautotune.com
It also comes with 3 ignition drivers wired up and ready to be hooked up - that is about a $35 value alone. This will allow for wasted spark output for 3 coils (like GM 2 towers) or you can add another 3 igniters and have 6 coil wasted setup for an OBD1 M50 etc. I am including the igniters wired for free, so no worries on that but I can de-mod it if you wish.
It also comes with a 250 kPA (21 psi) map sensor.
MS 3.57 for sale by Jon Kensy, on Flickr
MS 3.57 for sale by Jon Kensy, on Flickr
MS2 CPU for sale by Jon Kensy, on Flickr
MS2 CPU for sale by Jon Kensy, on Flickr
Thanks for looking!
Will fix images tonight
MegaSquirt v3.57 board w/ MS-1 and or MS-2 CPU
-
- Posts: 602
- Joined: Fri Dec 04, 2009 1:45 am
- ECU Model: S80 Pro
- Distributor: DTA UK
- Firmware Version: 73
- Location: Pennsylvania, USA
- Contact:
MegaSquirt v3.57 board w/ MS-1 and or MS-2 CPU
1992 700RWHP Pump Gas BMW