Comms cables

Post here if you want to sell or buy an ECU or related item.
User avatar
mefmotorsport
Posts: 543
Joined: Mon Aug 01, 2011 6:45 am
ECU Model: S100 Pro
Distributor: Mefmotorsport
Firmware Version: 79
Location: Merseyside
Contact:

Re: Comms cables

Post by mefmotorsport »

Cheers for nice comments!
murph81
Posts: 29
Joined: Tue Dec 13, 2011 3:44 pm
ECU Model: No ECU
Firmware Version: 33

Re: Comms cables

Post by murph81 »

mefmotorsport wrote:The USB comms cables are £37.50 or £42.40 with the re-flash switch fitted, £5 P&P for UK or £7.50 worldwide. Payment by Paypal to mefmotorsport@btinternet.com

martin
Hi Martin, I have an E48, I have been onto a local guy to map the car when I have it sorted.
Will the usb lead with flash switch make it easier for him to map?

Cheers Adam
User avatar
mefmotorsport
Posts: 543
Joined: Mon Aug 01, 2011 6:45 am
ECU Model: S100 Pro
Distributor: Mefmotorsport
Firmware Version: 79
Location: Merseyside
Contact:

Re: Comms cables

Post by mefmotorsport »

I would hope that the local guy would already have one as a bare minimum and hopefully a dyno knobs box if he says he can map it. He would only need one if he hasn't mapped DTA stuff before. Really the comms lead is for making basic map and settings changes and re-flashing the newer S series ecu's as the E48 can only have newer firmware installed by DTA inserting a newer Eprom chip inside it. Any reputable mapper will have a "dyno knobs box"

Martin
murph81
Posts: 29
Joined: Tue Dec 13, 2011 3:44 pm
ECU Model: No ECU
Firmware Version: 33

Re: Comms cables

Post by murph81 »

Hi Martin, I just sent you payment for a cable via paypal.

Even though I have an E48, I ordered the cable with the re-flash switch, it may come in handy if I ever get a newer ecu.

Let me know if there is any problem.

Cheers Adam
User avatar
mefmotorsport
Posts: 543
Joined: Mon Aug 01, 2011 6:45 am
ECU Model: S100 Pro
Distributor: Mefmotorsport
Firmware Version: 79
Location: Merseyside
Contact:

Re: Comms cables

Post by mefmotorsport »

OK, thanks Adam, I received the payment, I will get this off to you tomorrow,

cheers,

Martin
murph81
Posts: 29
Joined: Tue Dec 13, 2011 3:44 pm
ECU Model: No ECU
Firmware Version: 33

Re: Comms cables

Post by murph81 »

Thanks Martin!
murph81
Posts: 29
Joined: Tue Dec 13, 2011 3:44 pm
ECU Model: No ECU
Firmware Version: 33

Re: Comms cables

Post by murph81 »

Got the cable today, quality stuff!

Thanks again Martin!
Post Reply