For sale, a brand new wiring loom for an S40 that I made for a customer who then changed his mind and went S60 (had to make another one for him)!
Full professional spec loom made of raychem ptfe thinwall wire and covered in Raychem heatshrink, fully labelled up.
Usual spec, ie 4 injectors, wasted spark coil (can fit connector to suit your coil) water temp, air temp, crank sensor, outputs for pump relay, shift light tacho and fan relay, lambda sensor power and input.
I'm prepared to make any minor alterations to suit user if required.
£295
Martin
07837 721986
S40 wiring loom
- mefmotorsport
- Posts: 543
- Joined: Mon Aug 01, 2011 6:45 am
- ECU Model: S100 Pro
- Distributor: Mefmotorsport
- Firmware Version: 79
- Location: Merseyside
- Contact:
Re: S40 wiring loom
Martin,
Are you open to an offer on this loom?
Are you open to an offer on this loom?
- mefmotorsport
- Posts: 543
- Joined: Mon Aug 01, 2011 6:45 am
- ECU Model: S100 Pro
- Distributor: Mefmotorsport
- Firmware Version: 79
- Location: Merseyside
- Contact:
Re: S40 wiring loom
Yes, within reason, better moved on than sitting in the drawer unused!
Re: S40 wiring loom
what kind of layout was it intended for?
- mefmotorsport
- Posts: 543
- Joined: Mon Aug 01, 2011 6:45 am
- ECU Model: S100 Pro
- Distributor: Mefmotorsport
- Firmware Version: 79
- Location: Merseyside
- Contact:
Re: S40 wiring loom
It was a pretty standard loom, typically 1500mm lengths that suit most installations, I can measure the individual cables if required.welshpug wrote:what kind of layout was it intended for?
Martin
-
- Posts: 4
- Joined: Tue Mar 04, 2014 4:28 pm
- ECU Model: S40 Pro
- Distributor: Gunner Aaskou Motorsport
Re: S40 wiring loom
Hi...
do you still have this or what is the Price for one?
my setup:
Honda Civic, B16 DTA S40, serching for a digital dash
Regards
Kent
do you still have this or what is the Price for one?
my setup:
Honda Civic, B16 DTA S40, serching for a digital dash
Regards
Kent
- mefmotorsport
- Posts: 543
- Joined: Mon Aug 01, 2011 6:45 am
- ECU Model: S100 Pro
- Distributor: Mefmotorsport
- Firmware Version: 79
- Location: Merseyside
- Contact:
Re: S40 wiring loom
Yes, it's still available, contact me directly by email or give me a call 07837 721986 to discuss specifics
Martin
Martin