S40 wiring loom

Post here if you want to sell or buy an ECU or related item.
Post Reply
User avatar
mefmotorsport
Posts: 543
Joined: Mon Aug 01, 2011 6:45 am
ECU Model: S100 Pro
Distributor: Mefmotorsport
Firmware Version: 79
Location: Merseyside
Contact:

S40 wiring loom

Post by mefmotorsport »

For sale, a brand new wiring loom for an S40 that I made for a customer who then changed his mind and went S60 (had to make another one for him)!

Full professional spec loom made of raychem ptfe thinwall wire and covered in Raychem heatshrink, fully labelled up.

Usual spec, ie 4 injectors, wasted spark coil (can fit connector to suit your coil) water temp, air temp, crank sensor, outputs for pump relay, shift light tacho and fan relay, lambda sensor power and input.

I'm prepared to make any minor alterations to suit user if required.

£295

Martin
07837 721986
Antral
Posts: 194
Joined: Mon Aug 01, 2011 8:20 am

Re: S40 wiring loom

Post by Antral »

Martin,
Are you open to an offer on this loom? ;)
User avatar
mefmotorsport
Posts: 543
Joined: Mon Aug 01, 2011 6:45 am
ECU Model: S100 Pro
Distributor: Mefmotorsport
Firmware Version: 79
Location: Merseyside
Contact:

Re: S40 wiring loom

Post by mefmotorsport »

Yes, within reason, better moved on than sitting in the drawer unused!
welshpug
Posts: 130
Joined: Tue Sep 06, 2011 4:53 am
ECU Model: S40 Pro

Re: S40 wiring loom

Post by welshpug »

what kind of layout was it intended for?
User avatar
mefmotorsport
Posts: 543
Joined: Mon Aug 01, 2011 6:45 am
ECU Model: S100 Pro
Distributor: Mefmotorsport
Firmware Version: 79
Location: Merseyside
Contact:

Re: S40 wiring loom

Post by mefmotorsport »

welshpug wrote:what kind of layout was it intended for?
It was a pretty standard loom, typically 1500mm lengths that suit most installations, I can measure the individual cables if required.


Martin
KAHonda
Posts: 4
Joined: Tue Mar 04, 2014 4:28 pm
ECU Model: S40 Pro
Distributor: Gunner Aaskou Motorsport

Re: S40 wiring loom

Post by KAHonda »

Hi...

do you still have this or what is the Price for one?
my setup:
Honda Civic, B16 DTA S40, serching for a digital dash ;)

Regards
Kent
User avatar
mefmotorsport
Posts: 543
Joined: Mon Aug 01, 2011 6:45 am
ECU Model: S100 Pro
Distributor: Mefmotorsport
Firmware Version: 79
Location: Merseyside
Contact:

Re: S40 wiring loom

Post by mefmotorsport »

Yes, it's still available, contact me directly by email or give me a call 07837 721986 to discuss specifics

Martin
Post Reply