Since I've had so many requests for this I decided to make it available:
http://www.ebay.co.uk/itm/190779486884? ... 1555.l2649
Martin
DTA S40 pre-wired connector
- mefmotorsport
- Posts: 543
- Joined: Mon Aug 01, 2011 6:45 am
- ECU Model: S100 Pro
- Distributor: Mefmotorsport
- Firmware Version: 79
- Location: Merseyside
- Contact:
Re: DTA S40 pre-wired connector
Nice one, that should save on the cost of a crimping tool.
- mefmotorsport
- Posts: 543
- Joined: Mon Aug 01, 2011 6:45 am
- ECU Model: S100 Pro
- Distributor: Mefmotorsport
- Firmware Version: 79
- Location: Merseyside
- Contact:
Re: DTA S40 pre-wired connector
Hopefully it will help out some customers who struggle with fitting pins or soldering.
Martin
Martin
Re: DTA S40 pre-wired connector
how much would you charge for more wire?
- mefmotorsport
- Posts: 543
- Joined: Mon Aug 01, 2011 6:45 am
- ECU Model: S100 Pro
- Distributor: Mefmotorsport
- Firmware Version: 79
- Location: Merseyside
- Contact:
Re: DTA S40 pre-wired connector
How much more?
Re: DTA S40 pre-wired connector
Like it, do you have the correct crimp tool now
-
- Posts: 3577
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: DTA S40 pre-wired connector
I think offering all ecu model connectors would be a good thing, with either 300mm or say 2m of wire as per customer request..
From a sales point of view. It would do no harm to mention that these wires/pins are generic to the Tyco connector. And that same type of connector is used on most Motec, Haltech, DTA, and perhaps some other brand ecu's
So perhaps selling the wire with crimped pins, and choice of 26/34 pin housing as required is another option.
From a sales point of view. It would do no harm to mention that these wires/pins are generic to the Tyco connector. And that same type of connector is used on most Motec, Haltech, DTA, and perhaps some other brand ecu's
So perhaps selling the wire with crimped pins, and choice of 26/34 pin housing as required is another option.