DTA minature "Knobs" or "Dyno" boxes
-
- Posts: 120
- Joined: Tue Jul 26, 2011 7:45 am
- ECU Model: S80 Pro
- Firmware Version: 76
- Location: Montreal, Canada
Re: Miniature "Knobs" or "Dyno" boxes
Damn I'm late on my posts... lolll
That box sounds nice! You mention USB, Martin, but if I still have an older laptop using serial cable directly, it will still work?
No need to plug new wires in the DTA plugs?
No need to have your sdash to use the box?
That box sounds nice! You mention USB, Martin, but if I still have an older laptop using serial cable directly, it will still work?
No need to plug new wires in the DTA plugs?
No need to have your sdash to use the box?
Frank
VW Corrado VR6 Turbo GT3582R getting into a super light kit car
S80Pro
VW Corrado VR6 Turbo GT3582R getting into a super light kit car
S80Pro
- mefmotorsport
- Posts: 543
- Joined: Mon Aug 01, 2011 6:45 am
- ECU Model: S100 Pro
- Distributor: Mefmotorsport
- Firmware Version: 79
- Location: Merseyside
- Contact:
Re: Miniature "Knobs" or "Dyno" boxes
Hi Frank,
Yes, it's fine on an ordinary serial port, you just buy one without the USB adaptor so less £15 on the price.
It just plugs in like an ordinary comms cable at both ends, no additional wires in the ecu as it's all done through the 15 way D comms connector on the ecu.
Martin
Yes, it's fine on an ordinary serial port, you just buy one without the USB adaptor so less £15 on the price.
It just plugs in like an ordinary comms cable at both ends, no additional wires in the ecu as it's all done through the 15 way D comms connector on the ecu.
Martin
-
- Posts: 602
- Joined: Fri Dec 04, 2009 1:45 am
- ECU Model: S80 Pro
- Distributor: DTA UK
- Firmware Version: 73
- Location: Pennsylvania, USA
- Contact:
Re: Miniature "Knobs" or "Dyno" boxes
Mine is on the way - excited to give it a go!
1992 700RWHP Pump Gas BMW
- mefmotorsport
- Posts: 543
- Joined: Mon Aug 01, 2011 6:45 am
- ECU Model: S100 Pro
- Distributor: Mefmotorsport
- Firmware Version: 79
- Location: Merseyside
- Contact:
Re: Miniature "Knobs" or "Dyno" boxes
Has it arrived yet Jon?Jon K wrote:Mine is on the way - excited to give it a go!
martin
-
- Posts: 602
- Joined: Fri Dec 04, 2009 1:45 am
- ECU Model: S80 Pro
- Distributor: DTA UK
- Firmware Version: 73
- Location: Pennsylvania, USA
- Contact:
Re: Miniature "Knobs" or "Dyno" boxes
Just last night Martin! Going to check it out tonight! Thanks!
1992 700RWHP Pump Gas BMW
- mefmotorsport
- Posts: 543
- Joined: Mon Aug 01, 2011 6:45 am
- ECU Model: S100 Pro
- Distributor: Mefmotorsport
- Firmware Version: 79
- Location: Merseyside
- Contact:
Re: Miniature "Knobs" or "Dyno" boxes
Hey Jon, did you get to try your new knobs box yet?
These have become quite popular, I've sold a few now!
Martin
These have become quite popular, I've sold a few now!
Martin
-
- Posts: 602
- Joined: Fri Dec 04, 2009 1:45 am
- ECU Model: S80 Pro
- Distributor: DTA UK
- Firmware Version: 73
- Location: Pennsylvania, USA
- Contact:
Re: Miniature "Knobs" or "Dyno" boxes
Not yet martin - its on my desk by the front door. Trying it today! Just woke up and had some juice. I will take some pics and maybe even a little video clip of using it. Excited because it should make tuning all my lean spots at cruise easy!
1992 700RWHP Pump Gas BMW
-
- Posts: 18
- Joined: Sun Aug 07, 2011 11:30 am
Re: Miniature "Knobs" or "Dyno" boxes
hello
are these still for sale? if so how much?
are these still for sale? if so how much?
- mefmotorsport
- Posts: 543
- Joined: Mon Aug 01, 2011 6:45 am
- ECU Model: S100 Pro
- Distributor: Mefmotorsport
- Firmware Version: 79
- Location: Merseyside
- Contact:
- mefmotorsport
- Posts: 543
- Joined: Mon Aug 01, 2011 6:45 am
- ECU Model: S100 Pro
- Distributor: Mefmotorsport
- Firmware Version: 79
- Location: Merseyside
- Contact:
Re: Miniature "Knobs" or "Dyno" boxes
These are still available if anyone's interested, interest seems to have been renewed recently, I've made a couple over the last week!
Martin
Martin