can anyone in the uk point me in the right direction of where to get a couple of connector pins
I have damaged a female pin from a new socket of a weldon pump I could replace the plug but as its brand new I do not want to cut the pump one off if I can get replacement pins
this is the connector
http://www.weldonracing.com/product/54- ... _Pump.html
delphi connector pins
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: delphi connector pins
Not sure where you'd get them in the UK. US no problem though.
M-Cal, Polevault, SimtekUK maybe are some sellers of electrical stuff.
Or Bellanger in the US.
Depending on current, might just be easier to cut off both connectors and replace with something you can source.
M-Cal, Polevault, SimtekUK maybe are some sellers of electrical stuff.
Or Bellanger in the US.
Depending on current, might just be easier to cut off both connectors and replace with something you can source.
-
- Posts: 318
- Joined: Tue Aug 09, 2011 2:54 pm
- ECU Model: S80 Pro
- Distributor: Roverdose
- Location: Stevenage
- Contact:
Re: delphi connector pins
ive got what looks like those connector pins in the garage. is is the male or female pin you need?
ill get a pic, see if its the same.
Drew
ill get a pic, see if its the same.
Drew
Re: delphi connector pins
drew its the female pins
cheers bob
cheers bob
-
- Posts: 318
- Joined: Tue Aug 09, 2011 2:54 pm
- ECU Model: S80 Pro
- Distributor: Roverdose
- Location: Stevenage
- Contact:
Re: delphi connector pins
sorry its taken so long, been on holiday.
anyway, if these are any good to you (and you still need them)
cheers
Drew
anyway, if these are any good to you (and you still need them)
cheers
Drew