Would anyone happen to have a map out there for a standard 2.0 duratec, ideally on individual throttle bodies?
Many Thanks
Ross
Duratec 2.0 Map
Re: Duratec 2.0 Map
There is a Duratec Map in with the software - not std as using roller slides but should be enough to get you going?
-
- Posts: 5
- Joined: Mon Mar 16, 2020 2:11 pm
- ECU Model: S40 Pro
Re: Duratec 2.0 Map
Where are the maps as i have had a look in DTAswin but couldn't see them anywhere?
Re: Duratec 2.0 Map
Open DTAswin directory and there be Maps!Cossrollins wrote:Where are the maps as i have had a look in DTAswin but couldn't see them anywhere?
-
- Posts: 5
- Joined: Mon Mar 16, 2020 2:11 pm
- ECU Model: S40 Pro
Re: Duratec 2.0 Map
Many thanks for the help Katana, i have now found the maps but cant seem to locate a 2.0 duratec. i can see the st170 and zetec's amongst others.
Re: Duratec 2.0 Map
Its definitely there - I renamed all the 'Ford' maps so I could locate them easier - see >
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: Duratec 2.0 Map
That's not one of the standard maps.
-
- Posts: 5
- Joined: Mon Mar 16, 2020 2:11 pm
- ECU Model: S40 Pro
Re: Duratec 2.0 Map
Hopefully the picture i have attached will work, showing the maps which i can see.
if you could send me the file directly to rjamescollins@hotmail.com i would be extremely appreciative.
Thanks again
Ross
if you could send me the file directly to rjamescollins@hotmail.com i would be extremely appreciative.
Thanks again
Ross
Re: Duratec 2.0 Map
Dunno where it came from then as I haven't got a Duratec !Alex DTA wrote:That's not one of the standard maps.
I've attached the file below . . . . . .
- Attachments
-
- Ford Duratec 2.0 v2 199bhp.map
- (44.78 KiB) Downloaded 386 times
-
- Posts: 5
- Joined: Mon Mar 16, 2020 2:11 pm
- ECU Model: S40 Pro
Re: Duratec 2.0 Map
Many thanks, much appreciated.