Hello,
I need a map for my c20xe engine
I make irgent what wrong the injection nozzles are not controlled but with the test functions they.
Got a new s40
c20xe map
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: c20xe map
Here you go
- Attachments
-
- Vauxhall 2.0 XE Taper Bodies.map
- (44 KiB) Downloaded 447 times
Re: c20xe map
Thank you I'll test it tonight
The map is nevertheless the one from the inst cd ?
it does not work
The map is nevertheless the one from the inst cd ?
it does not work
Re: c20xe map
How does it not work? If the basic parameters are correct for the installation virtually ANY map will start an engine - won't run well but will run. Explain the problem in more detail?
Re: c20xe map
The injection nozzles do not get any voltage when starting.
The injector test make funkioneren the injectors and I can start the engine
The injector test make funkioneren the injectors and I can start the engine
- ignitionautosport
- Posts: 577
- Joined: Wed Jul 27, 2011 5:30 am
- ECU Model: S80 Pro
- Location: New Zealand
- Contact:
Re: c20xe map
Likely not syncing - do you have spark when cranking/starting?
In the software: Display and Test Functions -> Diagnostic Display window helps immensely, you can see if crank and cam are syncing, along with various other helpful info.
In the software: Display and Test Functions -> Diagnostic Display window helps immensely, you can see if crank and cam are syncing, along with various other helpful info.
| '94 GSR Lancer | '96 Toyota Carib 20V | '83 Toyota Starlet | www.ignitionautosport.co.nz |
Re: c20xe map
Slowly I think it is the injection
have times the WEBER 330 ordered
Let's see what happens
I have found the mistake
the petrol pressure control valve was defective
now the engine runs
have times the WEBER 330 ordered
Let's see what happens
I have found the mistake
the petrol pressure control valve was defective
now the engine runs