c20xe map

Post maps up for others to get them going in the right direction. DISCLAIMER: USE AT YOUR OWN RISK. CONFIRM VALUES!
Post Reply
LotusAlfi
Posts: 4
Joined: Mon Jan 16, 2017 6:28 am
ECU Model: S40 Pro
Distributor: QED

c20xe map

Post by LotusAlfi »

Hello,

I need a map for my c20xe engine
I make irgent what wrong the injection nozzles are not controlled :-( but with the test functions they.
Got a new s40
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: c20xe map

Post by Alex DTA »

Here you go
Attachments
Vauxhall 2.0 XE Taper Bodies.map
(44 KiB) Downloaded 444 times
LotusAlfi
Posts: 4
Joined: Mon Jan 16, 2017 6:28 am
ECU Model: S40 Pro
Distributor: QED

Re: c20xe map

Post by LotusAlfi »

Thank you :D I'll test it tonight

The map is nevertheless the one from the inst cd ?
it does not work
katana
Posts: 455
Joined: Sun Jan 27, 2013 6:08 pm
ECU Model: S60 Pro
Firmware Version: 29

Re: c20xe map

Post by katana »

How does it not work? If the basic parameters are correct for the installation virtually ANY map will start an engine - won't run well but will run. Explain the problem in more detail?
LotusAlfi
Posts: 4
Joined: Mon Jan 16, 2017 6:28 am
ECU Model: S40 Pro
Distributor: QED

Re: c20xe map

Post by LotusAlfi »

The injection nozzles do not get any voltage when starting.
The injector test make funkioneren the injectors and I can start the engine
User avatar
ignitionautosport
Posts: 577
Joined: Wed Jul 27, 2011 5:30 am
ECU Model: S80 Pro
Location: New Zealand
Contact:

Re: c20xe map

Post by ignitionautosport »

Likely not syncing - do you have spark when cranking/starting?

In the software: Display and Test Functions -> Diagnostic Display window helps immensely, you can see if crank and cam are syncing, along with various other helpful info.
| '94 GSR Lancer | '96 Toyota Carib 20V | '83 Toyota Starlet | www.ignitionautosport.co.nz |
LotusAlfi
Posts: 4
Joined: Mon Jan 16, 2017 6:28 am
ECU Model: S40 Pro
Distributor: QED

Re: c20xe map

Post by LotusAlfi »

Slowly I think it is the injection
have times the WEBER 330 ordered
Let's see what happens

I have found the mistake
the petrol pressure control valve was defective :oops:
now the engine runs
:D
Post Reply