2.0 16v map 9a pl volkswagen passat gti

Post maps up for others to get them going in the right direction. DISCLAIMER: USE AT YOUR OWN RISK. CONFIRM VALUES!
Post Reply
Dta2016
Posts: 6
Joined: Sat Sep 03, 2016 9:42 pm
ECU Model: No ECU
Firmware Version: 30.00

2.0 16v map 9a pl volkswagen passat gti

Post by Dta2016 »

Purchased this e48xp and came with this map for Volkswagen pl 2.0 16v Idles rich, top end is a bit lean needs a few adjustments but is running on my motor I will make some time to play with it, uploading because I see we don't have much content on here.

feel free to comment ask questions or download and give me so feed back on setting I may want to change and try!
Attachments
georg16V.map
2.0 16v map
(11.55 KiB) Downloaded 380 times
katana
Posts: 455
Joined: Sun Jan 27, 2013 6:08 pm
ECU Model: S60 Pro
Firmware Version: 29

Re: 2.0 16v map 9a pl volkswagen passat gti

Post by katana »

Not an expert but I wouldn't set sensor fails to extreme's, The mapper seems to be using fuel and ignition 0.00's in maps rather than fuel / ign cuts elsewhere. Fuel numbers do seem rich at top end but ok'ish lower in map but the Ignition map is very conservative for a 16v engine which may be giving a bad burn down low falsely indicating rich condition. Have you a wideband lambda hooked up? Will help a lot in avoidance of guessing!
Post Reply