maps 1.8T K04

Post maps up for others to get them going in the right direction. DISCLAIMER: USE AT YOUR OWN RISK. CONFIRM VALUES!
Post Reply
f.slabsi
Posts: 16
Joined: Thu Mar 16, 2017 5:37 am
ECU Model: S60 Pro
Distributor: DTAfast
Firmware Version: 68.00

maps 1.8T K04

Post by f.slabsi »

Please someone gave me a basic map for engine code AGU K04 turbo. I could start the engine
Syncro
Posts: 33
Joined: Tue Dec 15, 2015 2:54 am
ECU Model: S100 Pro
Distributor: Direct
Firmware Version: 73.01
Location: London, UK

Re: maps 1.8T K04

Post by Syncro »

Is it a standard engine? AGU has K03 turbo.

Or have you changed to a K04?
If so, what pistons are you using?

I might have a map for AGU with K04 and 9.0:1 pistons.
AWD Golf 2.5T
f.slabsi
Posts: 16
Joined: Thu Mar 16, 2017 5:37 am
ECU Model: S60 Pro
Distributor: DTAfast
Firmware Version: 68.00

Re: maps 1.8T K04

Post by f.slabsi »

The engine is standard and serial Pistons just got K04 turbo and injectors 470 cc
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: maps 1.8T K04

Post by Alex DTA »

Here's one that still uses the original amplifier.
If the amplifier has been removed, and the ECU is driving the coils directly, you must untick Amplified Coils in General Engine settings, or you will damage the ECU.
Attachments
VW Golf AGU.map
(45.31 KiB) Downloaded 386 times
Syncro
Posts: 33
Joined: Tue Dec 15, 2015 2:54 am
ECU Model: S100 Pro
Distributor: Direct
Firmware Version: 73.01
Location: London, UK

Re: maps 1.8T K04

Post by Syncro »

f.slabsi wrote:The engine is standard and serial Pistons just got K04 turbo and injectors 470 cc
I assume you mean standard pistons?

If you have the K04-023 I think you should consider lowering the CR a bit by fitting the ones from the 225HP engine, you can then run more boost which is where the advantages of the K04-023 become apparent.

The K04-001 is closer to the K03s.
AWD Golf 2.5T
Post Reply