S60 on a Suzuki Gsxr1000 K3/4

Post maps up for others to get them going in the right direction. DISCLAIMER: USE AT YOUR OWN RISK. CONFIRM VALUES!
1127r
Posts: 11
Joined: Sat Apr 18, 2015 7:26 am
ECU Model: S60 Pro
Location: Sussex

S60 on a Suzuki Gsxr1000 K3/4

Post by 1127r »

Help I am struggling I have sparks and injection on the test settings, but cant get the motor to start on all 4 cylinders only wants to run on cylinder 1 and 2 I am trying to run fully sequential I noted that the ignition rotor has 24 teeth but no missing teeth only a large uncut blank. and advice would be appreciated Thanks in advance Andy
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: S60 on a Suzuki Gsxr1000 K3/4

Post by stevieturbo »

photos...details...information.

Help us help you.

Upload the map you are trying to use, give us some more detail. Most may not be familiar with your exact engine. What sort of crank sensor does it use, is it all wired correctly ? Are you getting a stable rpm reading ?
Can you provide an oscilloscope trace ( P8 does not offer this feature so will need to be from a proper scope )

Are you getting crank sensor errors etc ?

You say there are 24 distinct teeth... AND or including a large uncut blank ? post a photo. Any area that does not have distinct teeth would generally bee seen as missing teeth.

Do you have a cam/phase sensor at all ? Or are you trying to run it wasted spark ? Is it wired accordingly ?
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: S60 on a Suzuki Gsxr1000 K3/4

Post by Rob Stevens »

My advice would be to not worry about sequential yet. If ever. Unless you have a very specific reason. It makes bugger all difference to full power.
Can you confirm how you have wired the coils, i.e. what output to what cylinder? as per the drawing? Likewise the injectors.
Does it have 2 injectors per cylinder?
The coil wiring should be as per the twin spark settings for simplicity as you don't have an odd firing engine, this way it will work in sequential and nonsequential (cop). And select twin spark in general engine settings.
Coil o/p1 = Cylinder 1
Coil o/p2 = Cylinder 3
Coil o/p5 = Cylinder 4
Coil o/p6 = Cylinder 2
katana
Posts: 455
Joined: Sun Jan 27, 2013 6:08 pm
ECU Model: S60 Pro
Firmware Version: 29

Re: S60 on a Suzuki Gsxr1000 K3/4

Post by katana »

1127r wrote:Help I am struggling I have sparks and injection on the test settings, but cant get the motor to start on all 4 cylinders only wants to run on cylinder 1 and 2 I am trying to run fully sequential I noted that the ignition rotor has 24 teeth but no missing teeth only a large uncut blank. and advice would be appreciated Thanks in advance Andy
If i'm right from your description it sounds like you are trying to use the std Suzuki wheel........it won't work successfully. Not sure if the K3/4 has a cam sensor which is required for full sequential control.
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: S60 on a Suzuki Gsxr1000 K3/4

Post by Alex DTA »

Post a crank scope.

As katana says, there are a few Kawasaki engines where the gap is in the wrong place, and the ECU struggles to read it.
Once I've got the software rewrite complete, it's one of the things I want to look at improving.
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: S60 on a Suzuki Gsxr1000 K3/4

Post by Rob Stevens »

He's on a P8 so doesn't have that luxury. but it sounds like its running but only on 2 cylinders
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: S60 on a Suzuki Gsxr1000 K3/4

Post by Alex DTA »

Title says S60?
katana
Posts: 455
Joined: Sun Jan 27, 2013 6:08 pm
ECU Model: S60 Pro
Firmware Version: 29

Re: S60 on a Suzuki Gsxr1000 K3/4

Post by katana »

Stevieturbo muddying the waters - obsessed with P8's LOL!
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: S60 on a Suzuki Gsxr1000 K3/4

Post by Rob Stevens »

S60 So it does! doh, I looked at his EUC Model so ignore my coil wiring
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: S60 on a Suzuki Gsxr1000 K3/4

Post by stevieturbo »

katana wrote:Stevieturbo muddying the waters - obsessed with P8's LOL!
His sig thing states his ecu is P8 lol
Post Reply