DTAForum.com - a forum for the DTA ECU

Hi new to the forum needing help, although have read forum posts for years, I have bought a sr20de nissan n/a race engine it was running omex 500 that has died these arnt repairable anymore i have a e48 which i have off my old car,
The omex maps are load x rpm so i presume mapped using map sensor, all my dta maps are tps
Is there a way of using the map figures off the omex and plotting them into the dta maps or are the figures useless
Has anyone got a tps map for a sr20de /sr20ve
Thanks john

You can use map as load on E48 so long as it has the right chip in it. I don't see a problem with your plan so long as the omex works in milliseconds in the map. Some ecu's use what appears to be a random number, Emerald use 0 - 255 values in the map that then get converted into Ms.

Hi it is a m27c256b 10f1 0248L chip fitted is this correct type i cant read the sticker on the case as its all blurred
Thank you very much for your help

If you can power it up, connecting it to the software will tell you the firmware version