Map transfer

Post maps up for others to get them going in the right direction. DISCLAIMER: USE AT YOUR OWN RISK. CONFIRM VALUES!
Post Reply
jpr.racing07
Posts: 55
Joined: Sun Feb 12, 2012 5:11 am
ECU Model: P8 Pro

Map transfer

Post by jpr.racing07 »

Good afternoon
Is it possible to load my old map from a p8 to S80
Regards
Jeremy
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Map transfer

Post by stevieturbo »

Pretty sure yes, but obviously you will still need to go through it and ensure everything has transferred correctly, and any new features are configured correctly before running the engine.
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Map transfer

Post by Alex DTA »

Yes.
Open DTASwin in offline mode, upload the P8 map and save it.
The only issue I've ever seen is the Transition from Cranking RPM is sometimes 2000.
jpr.racing07
Posts: 55
Joined: Sun Feb 12, 2012 5:11 am
ECU Model: P8 Pro

Re: Map transfer

Post by jpr.racing07 »

Thank you for your help , one last question for now I guess I can use the same p8 loom on the s80 by getting 2 plugs fitted to match the s80.
Regards
Jeremy
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Map transfer

Post by Alex DTA »

Correct
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Map transfer

Post by stevieturbo »

jpr.racing07 wrote:Thank you for your help , one last question for now I guess I can use the same p8 loom on the s80 by getting 2 plugs fitted to match the s80.
Regards
Jeremy
When I first changed from P8 to S80, I made a patch harness to go between the two just in case things didnt go smoothly and I needed to revert back quickly.

Not the tidiest, but it served its purpose at the time and then when happy all was good sorted wiring loom properly.
jpr.racing07
Posts: 55
Joined: Sun Feb 12, 2012 5:11 am
ECU Model: P8 Pro

Re: Map transfer

Post by jpr.racing07 »

Thanks Steve was wondering if that possible.
Regards
Jeremy
Post Reply