Page 1 of 1

Map transfer

Posted: Tue May 01, 2018 8:24 am
by jpr.racing07
Good afternoon
Is it possible to load my old map from a p8 to S80
Regards
Jeremy

Re: Map transfer

Posted: Tue May 01, 2018 11:51 am
by stevieturbo
Pretty sure yes, but obviously you will still need to go through it and ensure everything has transferred correctly, and any new features are configured correctly before running the engine.

Re: Map transfer

Posted: Tue May 01, 2018 3:07 pm
by Alex DTA
Yes.
Open DTASwin in offline mode, upload the P8 map and save it.
The only issue I've ever seen is the Transition from Cranking RPM is sometimes 2000.

Re: Map transfer

Posted: Wed May 02, 2018 2:10 am
by jpr.racing07
Thank you for your help , one last question for now I guess I can use the same p8 loom on the s80 by getting 2 plugs fitted to match the s80.
Regards
Jeremy

Re: Map transfer

Posted: Wed May 02, 2018 3:30 am
by Alex DTA
Correct

Re: Map transfer

Posted: Wed May 02, 2018 4:55 am
by stevieturbo
jpr.racing07 wrote:Thank you for your help , one last question for now I guess I can use the same p8 loom on the s80 by getting 2 plugs fitted to match the s80.
Regards
Jeremy
When I first changed from P8 to S80, I made a patch harness to go between the two just in case things didnt go smoothly and I needed to revert back quickly.

Not the tidiest, but it served its purpose at the time and then when happy all was good sorted wiring loom properly.

Re: Map transfer

Posted: Wed May 02, 2018 9:30 am
by jpr.racing07
Thanks Steve was wondering if that possible.
Regards
Jeremy