Reno map

Post maps up for others to get them going in the right direction. DISCLAIMER: USE AT YOUR OWN RISK. CONFIRM VALUES!
Post Reply
Spryboy1974
Posts: 33
Joined: Fri Aug 03, 2018 10:02 am
ECU Model: S40 Pro

Reno map

Post by Spryboy1974 »

Hi does anyone have a map for a Reno 2.0 16v f7r 714 engine kicking about??
As used in mk1 Megane.
Want to try and get this up and running to do some system checks before it goes off to the rolling road!
katana
Posts: 455
Joined: Sun Jan 27, 2013 6:08 pm
ECU Model: S60 Pro
Firmware Version: 29

Re: Reno map

Post by katana »

It thought Air Racer at first then realised you meant 'Renault' ;) No Sorry!
tryolz
Posts: 24
Joined: Tue Sep 20, 2016 4:47 am
ECU Model: S60 Pro
Distributor: xap
Firmware Version: 61
Location: Ardeche, France

Re: Reno map

Post by tryolz »

I have one for an F4R but it should start with an F7R if you are interested I can share it
Spryboy1974
Posts: 33
Joined: Fri Aug 03, 2018 10:02 am
ECU Model: S40 Pro

Re: Reno map

Post by Spryboy1974 »

Hi there tryolz,

Sorry not been on here for a while so just read your reply.

Would be a great help if you could share that map but I have no idea how we go about this as me and computers aren’t the best of friends!

Thanks
Neil
LoicBoods
Posts: 3
Joined: Thu Nov 11, 2021 7:55 am
ECU Model: S60 Pro
Firmware Version: 75.01

Re: Reno map

Post by LoicBoods »

Hello guys,
I'm new here.
Just got myself a S60 with the plan to use it on a Clio 172 (so F4R engine)
I am desperately looking for a base map.
From what I could read, you might have a base map.
Do you think you could share it with me please ?

Thanks
Loïc
katana
Posts: 455
Joined: Sun Jan 27, 2013 6:08 pm
ECU Model: S60 Pro
Firmware Version: 29

Re: Reno map

Post by katana »

Neither posters have been seen on the site for at least a couple of years so a response is unlikely! If you know the basic parameters of the engine you are using then modifying something like the Zetec map isn't too difficult, just need to be methodical!
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Reno map

Post by Alex DTA »

Email office@dtafast.co.uk, we have one for both the 830 and 7something engines.
Jonnyt80
Posts: 11
Joined: Thu Jul 13, 2017 5:04 pm
ECU Model: S60 Pro
Location: Perth

Re: Reno map

Post by Jonnyt80 »

they will run off a 60-2 trigger with a 274 offset if memory serves correct that on a 182 engine so should be the same.
LoicBoods
Posts: 3
Joined: Thu Nov 11, 2021 7:55 am
ECU Model: S60 Pro
Firmware Version: 75.01

Re: Reno map

Post by LoicBoods »

Sorry I did see you answered.
Thank you for your help !
I just sent an email to DTA, hopefully they will be able to help me.
I will keep you posted.
Thanks a lot
Post Reply