VW 16v Base Map

Post maps up for others to get them going in the right direction. DISCLAIMER: USE AT YOUR OWN RISK. CONFIRM VALUES!
Post Reply
Theboysmiffy
Posts: 2
Joined: Thu Jan 24, 2019 5:48 pm
ECU Model: S40 Pro

VW 16v Base Map

Post by Theboysmiffy »

Hi everyone.

I am just having the S40i wired up at the moment. It is being used with a 2.0 9a 16v, 276cams, bit of head work and twin 45 carbs. Does anyone have or know where I can get a map to get me going and drive to the rollers?

Thanks for your help

Adam
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: VW 16v Base Map

Post by Rob Stevens »

The supplied zetec map would do it once you have sorted the crank trigger out as you are on carbs
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: VW 16v Base Map

Post by Alex DTA »

As Rob says, as long as you have fitted a 36-1 trigger on the engine, all you'll need to alter is the Crank Sensor Angle in General Engine Settings, and it should start on the map shipped in the ECU.
Theboysmiffy
Posts: 2
Joined: Thu Jan 24, 2019 5:48 pm
ECU Model: S40 Pro

Re: VW 16v Base Map

Post by Theboysmiffy »

Thank you both. Would the car be drivable on this map? It’s 1hrs drive to my rolling road.

Cheers
Post Reply