Zetec Turbo Focus mk1 RS map needed

Post maps up for others to get them going in the right direction. DISCLAIMER: USE AT YOUR OWN RISK. CONFIRM VALUES!
Post Reply
Zoggon
Posts: 16
Joined: Thu Sep 04, 2014 10:01 am
ECU Model: P8 Pro

Zetec Turbo Focus mk1 RS map needed

Post by Zoggon »

Hello.

Does anyone have and would like to share a map for mk1 Focus RS (fuel and ignition map and maybe turbo settings)?
I'm looking for something close to standard settings to run own zetec rs turbo project.
Something for standard injectors (theese are 440cc I think), std. cams and standard boost pressure.

I would be grateful even for screenshots etc.

(I'm trying to run FRS mk1 engine in Sierra on DTA P8pro Ecu)
Thanks in advance for any help :!:
Alex DTA
Posts: 1511
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Zetec Turbo Focus mk1 RS map needed

Post by Alex DTA »

You can try the attached. it's for a 2L golf turbo on 440cc injectors, so should at least get you started. It has the correct trigger pattern and angles for a Zetec
Attachments

[The extension map has been deactivated and can no longer be displayed.]

Zoggon
Posts: 16
Joined: Thu Sep 04, 2014 10:01 am
ECU Model: P8 Pro

Re: Zetec Turbo Focus mk1 RS map needed

Post by Zoggon »

Thank you very much Alex.
It will be very helpful :)
Post Reply