Page 1 of 2

Duratec 2.0 Map

Posted: Tue Mar 17, 2020 7:58 am
by Cossrollins
Would anyone happen to have a map out there for a standard 2.0 duratec, ideally on individual throttle bodies?

Many Thanks

Ross

Re: Duratec 2.0 Map

Posted: Tue Mar 17, 2020 11:47 am
by katana
There is a Duratec Map in with the software - not std as using roller slides but should be enough to get you going?

Re: Duratec 2.0 Map

Posted: Tue Mar 17, 2020 12:36 pm
by Cossrollins
Where are the maps as i have had a look in DTAswin but couldn't see them anywhere?

Re: Duratec 2.0 Map

Posted: Tue Mar 17, 2020 2:21 pm
by katana
Cossrollins wrote:Where are the maps as i have had a look in DTAswin but couldn't see them anywhere?
Open DTAswin directory and there be Maps!
Maps Location.jpg

Re: Duratec 2.0 Map

Posted: Tue Mar 17, 2020 3:02 pm
by Cossrollins
Many thanks for the help Katana, i have now found the maps but cant seem to locate a 2.0 duratec. i can see the st170 and zetec's amongst others.

Re: Duratec 2.0 Map

Posted: Wed Mar 18, 2020 4:56 am
by katana
Its definitely there - I renamed all the 'Ford' maps so I could locate them easier - see >
Duratec Map.jpg

Re: Duratec 2.0 Map

Posted: Wed Mar 18, 2020 7:27 am
by Alex DTA
That's not one of the standard maps.

Re: Duratec 2.0 Map

Posted: Wed Mar 18, 2020 7:31 am
by Cossrollins
Hopefully the picture i have attached will work, showing the maps which i can see.
if you could send me the file directly to rjamescollins@hotmail.com i would be extremely appreciative.

Thanks again

Ross

Re: Duratec 2.0 Map

Posted: Wed Mar 18, 2020 9:06 am
by katana
Alex DTA wrote:That's not one of the standard maps.
Dunno where it came from then as I haven't got a Duratec !

I've attached the file below . . . . . .

Re: Duratec 2.0 Map

Posted: Wed Mar 18, 2020 10:02 am
by Cossrollins
Many thanks, much appreciated.