Duratec 2.0 Map

Post maps up for others to get them going in the right direction. DISCLAIMER: USE AT YOUR OWN RISK. CONFIRM VALUES!
Cossrollins
Posts: 5
Joined: Mon Mar 16, 2020 2:11 pm
ECU Model: S40 Pro

Duratec 2.0 Map

Post by Cossrollins »

Would anyone happen to have a map out there for a standard 2.0 duratec, ideally on individual throttle bodies?

Many Thanks

Ross
katana
Posts: 391
Joined: Sun Jan 27, 2013 6:08 pm
ECU Model: S60 Pro
Firmware Version: 29

Re: Duratec 2.0 Map

Post by katana »

There is a Duratec Map in with the software - not std as using roller slides but should be enough to get you going?
Cossrollins
Posts: 5
Joined: Mon Mar 16, 2020 2:11 pm
ECU Model: S40 Pro

Re: Duratec 2.0 Map

Post by Cossrollins »

Where are the maps as i have had a look in DTAswin but couldn't see them anywhere?
katana
Posts: 391
Joined: Sun Jan 27, 2013 6:08 pm
ECU Model: S60 Pro
Firmware Version: 29

Re: Duratec 2.0 Map

Post by katana »

Cossrollins wrote:Where are the maps as i have had a look in DTAswin but couldn't see them anywhere?
Open DTAswin directory and there be Maps!
Maps Location.jpg
Cossrollins
Posts: 5
Joined: Mon Mar 16, 2020 2:11 pm
ECU Model: S40 Pro

Re: Duratec 2.0 Map

Post by Cossrollins »

Many thanks for the help Katana, i have now found the maps but cant seem to locate a 2.0 duratec. i can see the st170 and zetec's amongst others.
katana
Posts: 391
Joined: Sun Jan 27, 2013 6:08 pm
ECU Model: S60 Pro
Firmware Version: 29

Re: Duratec 2.0 Map

Post by katana »

Its definitely there - I renamed all the 'Ford' maps so I could locate them easier - see >
Duratec Map.jpg
Alex DTA
Posts: 1511
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Duratec 2.0 Map

Post by Alex DTA »

That's not one of the standard maps.
Cossrollins
Posts: 5
Joined: Mon Mar 16, 2020 2:11 pm
ECU Model: S40 Pro

Re: Duratec 2.0 Map

Post by Cossrollins »

Hopefully the picture i have attached will work, showing the maps which i can see.
if you could send me the file directly to rjamescollins@hotmail.com i would be extremely appreciative.

Thanks again

Ross
Attachments
Untitled.png
katana
Posts: 391
Joined: Sun Jan 27, 2013 6:08 pm
ECU Model: S60 Pro
Firmware Version: 29

Re: Duratec 2.0 Map

Post by katana »

Alex DTA wrote:That's not one of the standard maps.
Dunno where it came from then as I haven't got a Duratec !

I've attached the file below . . . . . .
Attachments

[The extension map has been deactivated and can no longer be displayed.]

Cossrollins
Posts: 5
Joined: Mon Mar 16, 2020 2:11 pm
ECU Model: S40 Pro

Re: Duratec 2.0 Map

Post by Cossrollins »

Many thanks, much appreciated.
Post Reply