Good morning all i am running a sbc 377 on a Holley carb with a dta p8 pro and would like an ignition map , don't mind paying for it .
Thanks JPR
sbc with p8 pro
-
- Posts: 318
- Joined: Tue Aug 09, 2011 2:54 pm
- ECU Model: S80 Pro
- Distributor: Roverdose
- Location: Stevenage
- Contact:
Re: sbc with p8 pro
what country and where abouts are you?
Drew
Drew
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: sbc with p8 pro
There is no generic map or one fits all.jpr.racing07 wrote:Good morning all i am running a sbc 377 on a Holley carb with a dta p8 pro and would like an ignition map , don't mind paying for it .
Thanks JPR
And building your own map really should be incredibly easy.
ie...what did the dizzy have at idle ?
What did the dizzy have at full load/rpm ?
What did it have at part throttle.
Fill those values into the relevant sites and you will have a good working base map for you engine which can be fine tuned on a dyno.
It should take less than 5 minutes really then start tuning.
-
- Posts: 55
- Joined: Sun Feb 12, 2012 5:11 am
- ECU Model: P8 Pro
Re: sbc with p8 pro
thanks for replying i will give it ago you make it sound easy
-
- Posts: 55
- Joined: Sun Feb 12, 2012 5:11 am
- ECU Model: P8 Pro
Re: sbc with p8 pro
just another question what plug gap, used to have 35 tho with msd ing
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: sbc with p8 pro
plug gap has little to do with the ecu, and everything to do with your ignition coils.jpr.racing07 wrote:just another question what plug gap, used to have 35 tho with msd ing
So what coils are you using ? 35 thou sounds fine for a n/a engine and almost any modern coil.