Opel C30SE standard engine

Post maps up for others to get them going in the right direction. DISCLAIMER: USE AT YOUR OWN RISK. CONFIRM VALUES!
Post Reply
Anders_Karlsson
Posts: 116
Joined: Sat Jul 21, 2012 6:13 am
ECU Model: S80 Pro
Firmware Version: 66
Location: Sweden

Opel C30SE standard engine

Post by Anders_Karlsson »

Update!

Cranksensor position changed from 60 to 80 degrees BTDC!
Opel Commodore 3.0 24V_5.map
(44.79 KiB) Downloaded 344 times
Standard internals, light port job, naturally aspirated.
Single coil ignition with distributor.
Bosch 0 280 155 830 injectors, 350 cc/min @ 3 bar.



194 hp/266 Nm @ rear wheels, estimated 230 hp/300 Nm @ crank.

Use at your own risk, check all settings before attempting startup!
Post Reply