Map wanted for cosworth yb 7,4/1 comp gt3582r turbo

Post maps up for others to get them going in the right direction. DISCLAIMER: USE AT YOUR OWN RISK. CONFIRM VALUES!
Rs2000
Posts: 6
Joined: Tue Apr 23, 2013 4:47 am
ECU Model: S60 Pro
Firmware Version: 37

Map wanted for cosworth yb 7,4/1 comp gt3582r turbo

Post by Rs2000 »

Thanks :D
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Map wanted for cosworth yb 7,4/1 comp gt3582r turbo

Post by stevieturbo »

It would be a hell of a lot easier and safer just to make your own map, than try and use someone elses map when you give virtually no useful information in order to get one that might be usable.
User avatar
ignitionautosport
Posts: 577
Joined: Wed Jul 27, 2011 5:30 am
ECU Model: S80 Pro
Location: New Zealand
Contact:

Re: Map wanted for cosworth yb 7,4/1 comp gt3582r turbo

Post by ignitionautosport »

I agree. As painful as it can be to set up the crank angles and stuff, at least you know it is correct. And you learn a bunch of stuff while setting it up which is never a bad thing.
| '94 GSR Lancer | '96 Toyota Carib 20V | '83 Toyota Starlet | www.ignitionautosport.co.nz |
Rs2000
Posts: 6
Joined: Tue Apr 23, 2013 4:47 am
ECU Model: S60 Pro
Firmware Version: 37

Re: Map wanted for cosworth yb 7,4/1 comp gt3582r turbo

Post by Rs2000 »

I have used chip before it works
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Map wanted for cosworth yb 7,4/1 comp gt3582r turbo

Post by stevieturbo »

Rs2000 wrote:I have used chip before it works
What's that mean when translated ?
Roverdose
Posts: 318
Joined: Tue Aug 09, 2011 2:54 pm
ECU Model: S80 Pro
Distributor: Roverdose
Location: Stevenage
Contact:

Re: Map wanted for cosworth yb 7,4/1 comp gt3582r turbo

Post by Roverdose »

i guess used a chip in a std ecu.

once wired up the ecu will give you an idea of where the crank angle is, it has a function in it to tell you. simple.

there are a few maps with the ecu software, im sure there is something in there to get a base set of fuel and ignition numbers.

Drew
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Map wanted for cosworth yb 7,4/1 comp gt3582r turbo

Post by stevieturbo »

I dont believe DTA will work with the factory cossie triggers ( ie 4 tooth crank, 2 tooth cam )

He doesnt state what map sensor, what injectors, crank trigger, what coolant or air temp sensors...or really, anything that might be remotely useful for acquiring another map.
Rs2000
Posts: 6
Joined: Tue Apr 23, 2013 4:47 am
ECU Model: S60 Pro
Firmware Version: 37

Re: Map wanted for cosworth yb 7,4/1 comp gt3582r turbo

Post by Rs2000 »

It is not the first start I've run with gt3071r 8/1 comp 630cc switched to 1000cc 7.4 / 1 comp gt3582r turbo ,when I ran st ECU was just buying new chip when I swapped turbo
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Map wanted for cosworth yb 7,4/1 comp gt3582r turbo

Post by stevieturbo »

Rs2000 wrote:It is not the first start I've run with gt3071r 8/1 comp 630cc switched to 1000cc 7.4 / 1 comp gt3582r turbo ,when I ran st ECU was just buying new chip when I swapped turbo
Can you please speak english or at least explain properly ?

What isnt a first start ? So you already have the engine running with a DTA ecu ?

That's silly low compression....real 70's and 80's style.

What is an "st ECU" ?

So are you still running the original ecu or not ?
Rs2000
Posts: 6
Joined: Tue Apr 23, 2013 4:47 am
ECU Model: S60 Pro
Firmware Version: 37

Re: Map wanted for cosworth yb 7,4/1 comp gt3582r turbo

Post by Rs2000 »

sorry my english, I've run with dta s60 ecu for 6 years, std ECU is Engine Control Unit - Standard (ECU)cosworth yb,What do you know about compression for cosworth yb ?
Post Reply