Help with a base map for Vw Golf 16v Turbo.

Post maps up for others to get them going in the right direction. DISCLAIMER: USE AT YOUR OWN RISK. CONFIRM VALUES!
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: Help with a base map for Vw Golf 16v Turbo.

Post by Rob Stevens »

I've been to Troy at Northampton Motorsport, who was fine but had to abort mapping unfortunately, he didn't charge much for the 1 hour on the dyno, tidy well set up place with single type roller ++++. Also I hear that Aldon Automotive are ok but they can only cope with 250 ish bhp. Also look for a guy called Chris who works for Gugallami in Daventry, he is good but not sure if he has his own rollers working?
apow
Posts: 12
Joined: Tue May 07, 2013 3:46 pm
ECU Model: S40 Pro
Firmware Version: 60

Re: Help with a base map for Vw Golf 16v Turbo.

Post by apow »

Howdy Peeps,

Just anothe quick question.

If possible could some take alook at my map if i were to sent it to them just to put some standard values in so i can just drive the car alittle to trouble shooting any mechanical issue that may occure.

I know every car is different but i dont want to cause any issues with the current map as it was for a similair project but alot more power.

thanks.
Post Reply