306 gti6 gsxr bodies map needed e48 dta

Post maps up for others to get them going in the right direction. DISCLAIMER: USE AT YOUR OWN RISK. CONFIRM VALUES!
Post Reply
Wolly205gti6
Posts: 3
Joined: Fri Sep 04, 2015 8:42 am
ECU Model: No ECU
Distributor: Jdm dyno, cumbria
Firmware Version: 44.0

306 gti6 gsxr bodies map needed e48 dta

Post by Wolly205gti6 »

Hi. I am new on here! :D. I am looking for a map to suit my 306 gti6 powerd 205! I uave gsxr bodies on it and need a map asap!?!? Can any one help.
THANKS :D
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: 306 gti6 gsxr bodies map needed e48 dta

Post by Rob Stevens »

It's best that you read the manual and understand how the map is built up first, you need to understand the crank trigger pattern and the sensor location regards TDC.

From personal experience the throttle pot on gsxr1300's is difficult to use on the earlier DTSwin software, you may be ok? This is due to the standard open and closed positions falling in the fault zone, caused by Suzuki using only 70deg of a 110deg sensor.
Wolly205gti6
Posts: 3
Joined: Fri Sep 04, 2015 8:42 am
ECU Model: No ECU
Distributor: Jdm dyno, cumbria
Firmware Version: 44.0

Re: 306 gti6 gsxr bodies map needed e48 dta

Post by Wolly205gti6 »

Have you any manual? Cheers
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: 306 gti6 gsxr bodies map needed e48 dta

Post by stevieturbo »

Wolly205gti6
Posts: 3
Joined: Fri Sep 04, 2015 8:42 am
ECU Model: No ECU
Distributor: Jdm dyno, cumbria
Firmware Version: 44.0

Re: 306 gti6 gsxr bodies map needed e48 dta

Post by Wolly205gti6 »

Thanks
thethinkingman
Posts: 32
Joined: Mon Feb 15, 2016 3:51 pm
ECU Model: S40 Pro
Firmware Version: 34.0
Location: Dalgety Bay, Scotland

Re: 306 gti6 gsxr bodies map needed e48 dta

Post by thethinkingman »

Hi i have a map for the GTi6 running Jenvey ITB's, standard injectors on E48. Once my laptop is fixed i'll happily send it you if its of any use, should be a good base map.
Nay125
Posts: 1
Joined: Tue Mar 29, 2016 11:39 am
ECU Model: S40 Pro

Re: 306 gti6 gsxr bodies map needed e48 dta

Post by Nay125 »

Hi, I'm really struggling with getting a base map for my Jenveys on a my GTi6 and seen this add. would you please send me the map too if this is okay. .
Post Reply