Firmware

This section is dedicated to discussion of DTA engine control units such as the DTA E48 EXP, P8 Pro, DTA S40, S60, S80, and S100, as well as all things ECU related.
Post Reply
Antral
Posts: 194
Joined: Mon Aug 01, 2011 8:20 am

Firmware

Post by Antral »

V77 now, constant upgrades is this any use to anyone?
Jon K
Posts: 602
Joined: Fri Dec 04, 2009 1:45 am
ECU Model: S80 Pro
Distributor: DTA UK
Firmware Version: 73
Location: Pennsylvania, USA
Contact:

Re: Firmware

Post by Jon K »

Yes! Prime pulse! Finally! I am interested to know more about the electronic dump valve on over run, I think that's talking about an electronic valve for ALS?
1992 700RWHP Pump Gas BMW
Image
stevieturbo
Posts: 3588
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Firmware

Post by stevieturbo »

Was there not a prime pulse on start of cranking anyway ?

No idea about the electronic dump valve...obviously it's aimed at a specific vehicle ?
Mr Drew
Posts: 62
Joined: Mon Apr 09, 2012 11:08 am
ECU Model: S80 Pro
Firmware Version: 62

Re: Firmware

Post by Mr Drew »

I think some of the VAG cars are running electronic dump valves rather than vac operated.
User avatar
mefmotorsport
Posts: 543
Joined: Mon Aug 01, 2011 6:45 am
ECU Model: S100 Pro
Distributor: Mefmotorsport
Firmware Version: 79
Location: Merseyside
Contact:

Re: Firmware

Post by mefmotorsport »

This doesn't seem to have been so well publicised!

V73 Release:- Paddle Shift Controller

V73 Adds the ability to use the extra functionality of an S100, not needed for most engine applications, to act as a fully featured paddle shift gearbox controller.
Configurable for most sequential gearbox layouts, with different 1/2 shift neutral positions. RPM limited downshifts, closed loop up and downshifts, variable throttle
blipper lead and timing as well as RPM and paddle pull triggered auto upshifting. Configurable anti push system for downshifts.

Safety features include position sensor limits and sanity checking, stuck down paddle rejection as well as neutral button requirements.
Jon K
Posts: 602
Joined: Fri Dec 04, 2009 1:45 am
ECU Model: S80 Pro
Distributor: DTA UK
Firmware Version: 73
Location: Pennsylvania, USA
Contact:

Re: Firmware

Post by Jon K »

Good to know Martin thanks
1992 700RWHP Pump Gas BMW
Image
User avatar
mefmotorsport
Posts: 543
Joined: Mon Aug 01, 2011 6:45 am
ECU Model: S100 Pro
Distributor: Mefmotorsport
Firmware Version: 79
Location: Merseyside
Contact:

Re: Firmware

Post by mefmotorsport »

V78 now supports OE Ford Zetec cylinder head water temp sensor!

Martin
Jon K
Posts: 602
Joined: Fri Dec 04, 2009 1:45 am
ECU Model: S80 Pro
Distributor: DTA UK
Firmware Version: 73
Location: Pennsylvania, USA
Contact:

Re: Firmware

Post by Jon K »

That part I knew because its in the release notes, but still cool
1992 700RWHP Pump Gas BMW
Image
Post Reply