Rolling Roads for motorcycle

This section is dedicated to discussion of DTA engine control units such as the DTA E48 EXP, P8 Pro, DTA S40, S60, S80, and S100, as well as all things ECU related.
Post Reply
mark220475
Posts: 37
Joined: Fri Jan 24, 2014 7:59 am
ECU Model: S60 Pro
Firmware Version: 74

Rolling Roads for motorcycle

Post by mark220475 »

Hello All,

I am looking for a Rolling Roads for a motorcycle in the North East of England, has anyone out there, had any dealing with rolling roads up here and if so
who's good and who's not so good?
Top
Roverdose
Posts: 318
Joined: Tue Aug 09, 2011 2:54 pm
ECU Model: S80 Pro
Distributor: Roverdose
Location: Stevenage
Contact:
Contact Roverdose

Re: Rolling Roads for motorcycle

Post by Roverdose »

i had mine on a normal rollers, the large drum type not 2 small ones. seemed to work ok.

didnt have a load of power, modded '04 R1

Drew
Top
katana
Posts: 456
Joined: Sun Jan 27, 2013 6:08 pm
ECU Model: S60 Pro
Firmware Version: 29

Re: Rolling Roads for motorcycle

Post by katana »

Try......http://www.dyno-centre.co.uk/ or http://www.turbopacs.com/New-Dyno-Rolli ... qn_90.html.
I don't have any affiliations with either nor have I used them - my usual ones are South East UK.
Top
mark220475
Posts: 37
Joined: Fri Jan 24, 2014 7:59 am
ECU Model: S60 Pro
Firmware Version: 74

Re: Rolling Roads for motorcycle

Post by mark220475 »

In the end I used
http://racehq.co.uk/
very happy with the work he carried out
Top
Post Reply

Return to “General”