VW crank position sensor degrees

[Alex DTA]

Wouldn't help, I don't know the answer.

Will try to find out.

[Alex DTA]

There are jumpers inside the ECU that need moving around. Here is a diagram:

http://www.dtafast.co.uk/Downloads/Manuals/P8JUMPER.pdf

[Robin_16v]

Thanks for the info guys! Makes it more clear.
This is the first time, that i am busy with dta, so changing the jumpers is a bit scary for me haha, bit i find it interesting i will definitely look into it. What i have done is the following: Ordered a crank sensor from a 101bhp(engine code AEK) 1.6 8v engine(part number 021 907 319 B). This was a inductive sensor and its a straight fit for the abf. First i ordered a sensor from a 1.8 20vt, but this one doesn't fit.

Robin

[JON-TEC-RALLYE]

hello good night, I will allow ABF advice on motor and sensor on crankshaft.

vw OEM sensor for some reason does not work practically never.
  I installed on many occasions the sensor of a Citroen Saxo 8 or 16v year 1996-2000 built cable.
  fits perfectly and work the first time, you only need to put some type of silicone to prevent leakage of oil inside the engine.

[grant620]

1.8T crank sensors are magnetic (VR) and cam sensors are Hall.