DTA G Dash

[CormacPhelan]

Hi All

Not sure have I posted in the correct place so sorry if I haven't...

I recently bought a rally car which is equipped with a DTA G Dash something no one seems to know how to setup or program. I have been in touch with DTA and XAP both of which have been very helpful but where unable to assist in my issue.

The problem I have is the RPM scale on the current screen is 0 to 6000rpm.
However my car revs to 9000rpm.

I am really hoping someone knows how to change the scale as something like 3000rpm to 9500 rpm would be a huge benefit I have tried every different screen possible with the aid of the software and have had no joy.

I would really appreciate your help with this.

Many thanks
Cormac

[stevieturbo]

All manuals, user config software etc here

http://www.dtafast.co.uk/downloads/

At a glance, nothing in there suggests there is any 6k limitation. On screenshot clearly shows it going to 10k.

[Alex DTA]

Just a bit of background here.

Cormac's already been in touch, and we've been able to set up everything else.
However, neither Allan nor the manufacturer can tell me how to change the RPM range on the dash.
Hopefully someone here can help.

[CormacPhelan]

Hi Guys

Thank you very much for your reply's.
The good news I have finally figured out the programming of the G Dash.
Funny enough I found the answer to the problem in the spec sheet for the DTA X Dash.
I now have a rev display going from 3,000rpm to 9,000rpm.

Have to say the information available on the GDash is really poor and from all the stuff I'v done on the programming I would imagine anyone who knows about programming any of the new dashes would master this very basic software very fast.

Thanks again

[stevieturbo]

If it's made by XAP....they're french. So that could explain a lot lol

[ignitionautosport]

If it's made by XAP....they're french. So that could explain a lot lol