Hi guys,
Quick question that I can't seem to find the answer to:
Are mapping files interchangeable between different ECU models? Since the S100 includes the same pinout as the S80 with some added functions.
My car currently uses the S80, if I decide to upgrade this to a S100, will I be able to simply upload the settings or will I be prompted some ECU mismatch error and forced to fill in all settings manually?
thanks!
kind regards,
Tom
S series maps interchangeable?
-
- Posts: 1247
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: S series maps interchangeable?
it will work fine, its actually the same ecu with the additional features disable.
-
- Posts: 1622
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: S series maps interchangeable?
Maps are interchangeable between any ECU. You can load an S100 map onto an S40, and vice versa, it will work fine.
E48/P8 maps can be updated to be used in S series ECUs.
S Series ECUs can have the firmware upgraded without affecting the map.
E48/P8 maps can be updated to be used in S series ECUs.
S Series ECUs can have the firmware upgraded without affecting the map.
Re: S series maps interchangeable?
thanks for the quick replies !