DTA ECU: 4cylinder->8 injectors
Re: DTA ECU: 4cylinder->8 injectors
Yeah that's correct
Re: DTA ECU: 4cylinder->8 injectors
As far as im aware the ecu won't run the primary injectors up to 100% if secondary's are available even if you select 100%.
Something in the background settings, maybe Alex could confirm?
Something in the background settings, maybe Alex could confirm?
-
- Posts: 1622
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: DTA ECU: 4cylinder->8 injectors
I've used 100% as a bad example. I don't know the actual %, I'll have to look through the code to work it out.
Future plans are to set this to a user definable value.
Future plans are to set this to a user definable value.
-
- Posts: 177
- Joined: Tue May 13, 2014 5:30 am
- ECU Model: S80 Pro
- Distributor: DTA UK
- Firmware Version: 73
Re: DTA ECU: 4cylinder->8 injectors
I think it's somewhere around 80% anyway when you watch the duty cycles.
I'm running the same setup on my engine as you OP, just running them as primaries and secondaries with a blend map.
I'm running the same setup on my engine as you OP, just running them as primaries and secondaries with a blend map.
-
- Posts: 21
- Joined: Tue May 13, 2014 4:47 am
- ECU Model: S80 Pro
- Firmware Version: 73
- Location: Germany
Re: DTA ECU: 4cylinder->8 injectors
Hi,
A little update: I didn't bought the engine, because one of 4 cylinder have a bad surface, so I think it was a piston failure.
So I will search a other engine.
Regards Stefan
A little update: I didn't bought the engine, because one of 4 cylinder have a bad surface, so I think it was a piston failure.
So I will search a other engine.
Regards Stefan