Odd fire on a PRV

This section is dedicated to discussion of DTA engine control units such as the DTA E48 EXP, P8 Pro, DTA S40, S60, S80, and S100, as well as all things ECU related.
Post Reply
rxboxster
Posts: 42
Joined: Tue Nov 17, 2015 3:17 am
ECU Model: S80 Pro

Odd fire on a PRV

Post by rxboxster »

Hi guys.
I'm looking to turbo the PRV in my Delorean, the engine is a 6 Cylinder odd fire. How would I set up a dta to run odd fire?

Cheers
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Odd fire on a PRV

Post by Alex DTA »

S80 required with cam sensor, then tick the unequal fire option in coil settings.
rxboxster
Posts: 42
Joined: Tue Nov 17, 2015 3:17 am
ECU Model: S80 Pro

Re: Odd fire on a PRV

Post by rxboxster »

I was thinking run it as a 3 cylinder with wasted spark too. Just looking at the different options ;-)
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: Odd fire on a PRV

Post by Rob Stevens »

That would work only if you have pairs of cylinders located 360 deg apart in a rotational sense.
rxboxster
Posts: 42
Joined: Tue Nov 17, 2015 3:17 am
ECU Model: S80 Pro

Re: Odd fire on a PRV

Post by rxboxster »

cheers buddy :)
Post Reply