first start 1.8T AGU

This section is dedicated to discussion of DTA engine control units such as the DTA E48 EXP, P8 Pro, DTA S40, S60, S80, and S100, as well as all things ECU related.
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: first start 1.8T AGU

Post by Alex DTA »

If you don't have sequential ignition turned on, the ECU will assume there's a coil pack on there.
Either turn on One coil per plug, or tick twin spark. Twin spark runs COP in wasted spark mode.
f.slabsi
Posts: 16
Joined: Thu Mar 16, 2017 5:37 am
ECU Model: S60 Pro
Distributor: DTAfast
Firmware Version: 68.00

Re: first start 1.8T AGU

Post by f.slabsi »

I know it's a small, but I have adhered involved coils and spray?
Attachments
engine.jpg
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: first start 1.8T AGU

Post by Alex DTA »

That's correct
f.slabsi
Posts: 16
Joined: Thu Mar 16, 2017 5:37 am
ECU Model: S60 Pro
Distributor: DTAfast
Firmware Version: 68.00

Re: first start 1.8T AGU

Post by f.slabsi »

Finally, the engine was running fine, the error was in the order of an amplifier coils. Thank you to everyone, especially Alex for help! :-)
Post Reply