bluetooth serial adaptor

This section is dedicated to discussion of DTA engine control units such as the DTA E48 EXP, P8 Pro, DTA S40, S60, S80, and S100, as well as all things ECU related.
Post Reply
DiscoPotatoes
Posts: 52
Joined: Fri May 04, 2012 2:51 pm
ECU Model: P8 Pro

bluetooth serial adaptor

Post by DiscoPotatoes »

Hi all,
I'm not sure where to put the question on the forum so I put it in here,
Can anyone tell me if a Bluetooth 9 pin rs232 serial adaptor will work with a p8 pro? I know they can be temperamental connecting to com ports, ive never used a Bluetooth adaptor but it would be great if it works so I can loose all the wires and just have a tablet on the dash.
thanks in advance
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: bluetooth serial adaptor

Post by Alex DTA »

No chance.

I experimented with an S Series ECU, and it would sometimes download, but never upload. Looks like it uses two ports, so it's not going to happen.
DiscoPotatoes
Posts: 52
Joined: Fri May 04, 2012 2:51 pm
ECU Model: P8 Pro

Re: bluetooth serial adaptor

Post by DiscoPotatoes »

ah ok thanks
Post Reply