Idle tuning S60 PRO Mercedes 2.5 16V
Posted: Sun Aug 06, 2017 2:22 pm
Hi,
Thank you for reading this post.
Can someone please point me in the right direction on tuning idle?
The setup is as follows;
Mercedes 190E 2.5 16V, BMW throttle body and 3pin Bosch idle valve, S60 PRO.
I find tuning and maintaining a steady idle to be difficult. It will hunt quite a bit, and often stall.
The base settings for the idle is bits and pieces of info found across the web, so If I'm not sure if it's correct in any way.
I have attached some screenshots of the maps, so please comment if you have any input on the subject.
Thank you,
Eivind, Norway
Thank you for reading this post.
Can someone please point me in the right direction on tuning idle?
The setup is as follows;
Mercedes 190E 2.5 16V, BMW throttle body and 3pin Bosch idle valve, S60 PRO.
I find tuning and maintaining a steady idle to be difficult. It will hunt quite a bit, and often stall.
The base settings for the idle is bits and pieces of info found across the web, so If I'm not sure if it's correct in any way.
I have attached some screenshots of the maps, so please comment if you have any input on the subject.
Thank you,
Eivind, Norway