S40 prp

This section is dedicated to discussion of DTA engine control units such as the DTA E48 EXP, P8 Pro, DTA S40, S60, S80, and S100, as well as all things ECU related.
Post Reply
Mk2cosworth
Posts: 1
Joined: Sun Sep 10, 2017 4:00 pm
ECU Model: S40 Pro
Firmware Version: 73.01

S40 prp

Post by Mk2cosworth »

Can any body advise please. No spark wiring all checks out but all 3 terminals at coil are live has my ecu gone down. Fitted to red top vauxhall
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: S40 prp

Post by stevieturbo »

new or old install ?

Has it ever worked correctly ?

So no spark during a coil test ? Are you conducting the test correctly ?

Exactly what coil pack, and is the ecu set correctly for this ? ( ie internal or external amps ?
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: S40 prp

Post by Alex DTA »

All 3 terminals are supposed to be 12v.

If it's not firing the spark plugs, it's probably not syncing.

Can you connect to the ECU to see the diagnostics?
Post Reply